Filter
Top Products
Device Overview
— The Device Overview page displays
a list of all the devices you can control.
You can jump to the main control page
of your device by tapping the device
button in the list.
Access the Device Overview page by
tapping the DEVICE OVERVIEW button
at the middle of the UPPER TOOL BAR.
When you jump to a Device by tapping the device button in the
Device Overview pages, the RC9500 will change the input of
your home theater receiver/preamp.
Note The commands assigned to the device button are called
the Device Actions.
If you have more than seven devices, scroll arrows allow you to
navigate to the next Device Overview page.
zUsing Device Overview without Changing Input (No IR)
If you don’t want to change the input for your
receiver/preamp, you can only jump to a Device without
changing the input by the following steps;
1. Display the Device Overview page, by tapping
the DEVICE OVERVIEW button.
2. Look at the label for the Left and Right Function
buttons. At this moment, they are labeled “No IR”.
3. Press and hold either one of the Left and Right
Function buttons, then tap the device you would like to
jump to. No “input select” commands will be sent to
your receiver/preamp.
User Guide
8
Getting Started
DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 12