Filter
Top Products
Reference
8 Return to the Mode Menu page by tapping label in the
LOWER TOOL BAR.
9 Return to USE mode by pressing the Left Function button
labeled “Exit” via the Mode Menu page.
Programming The Device Buttons (Device Action)
Note When you teach a command as a Device Action, this command
will be sent when you select the Device from the Device
Overview page.
Remember, the only way to NOT issue this command is to reveal
the Device Overview page, press and hold the Left or Right
Function buttons (now labeled “No IR”) and select the device.
1 Tap and hold the MODE icon in the LOWER TOOL BAR
more than 3 seconds. Mode Menu page appears.
2 Tap the “LEARN” button to switch to the LEARN mode
.
3 Select the “Learn device action” button.
The Device Overview page appears.
4 Complete steps 4 to 9 in “Programming Touch Screen buttons”
on page 29. Instead of tapping a button on the Touch Screen,
press the Device button you want to program.
Programming the Hard Buttons per Device
The Hard buttons are defined as the five hard buttons next right to
the Touch Screen (Channel Up/Down, Volume Up/Down, Mute) and
the ten buttons below the Touch Screen (Cursor Up, Down, Right,
Left, Menu, Enter, Exit, HOME, Left and Right Function buttons).
User Guide
30
DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 34