Filter
Top Products
2 Tap the repeat toggle button.
By default 'No' is selected.
The Repeat button toggles between the three settings:
No: This is the default setting
Daily
Weekly
1. To change the setting to “Daily”,
tap the button again.
Every day of the week is
automatically selected.
2. If you want to set an end date for
the repeating timer, select the
End Date check box.
The End Date is enabled.
3. Define the End Date, as described in 'Setting the Start Date'
on page 51.
The End Date is defined.
-or-
1. To change the setting to “Weekly”, tap the button again.
The current day is selected.
2. Select or deselect the different days of the week on which
the timer has to be executed.
3. If you want to set an end date for the repeating timer, select
the End Date check box.
The End Date is enabled.
4. Define the End Date, as described in 'Setting the Start Date'
on page 51.
The End Date is defined.
-or-
1. To change the setting to “No”, tap the button again.
The timer will not be repeated.
3 Tap "OK" button in the Repeat Settings page.
The Editing Timer page appears again. Feedback about the
repeat settings is provided below the "Repeat Settings" button.
User Guide
53
Reference
DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 57