Filter
Top Products
User Guide
38
Reference
5 You can add the device with or without RC codes.
Create with RC codes: Choose this option if you have the
exact Marantz component listed. The new device is added
with operational buttons.
Create without RC codes: If you choose this option, the
new device is added with grayed-out buttons. Program them
using LEARN and LABEL mode.
Note When you add a device without RC codes, all buttons are visible
as grayed-out. (see page 29)
By experimentally adding devices and inspecting them in USE
mode, you can decide which is the best match to your
component and delete the ones not used.
Tap the button of your choice.
The new device will be automatically added in the Device
Overview when you return to USE mode.
5 Add all other devices you want and return to the Mode Menu
page by tapping label in the LOWER TOOL BAR.
6 Return to USE mode by pressing the Left Function button
labeled “Exit”.
Copy Existing Device
Tap the “Copy existing device” button in the ADD mode page to
copy a device that is already active.
Tip It is often useful to have two almost identical devices for your
Television. The only difference between the two is one would
have the Vol+ and Vol- Direct Access buttons programmed
locally with the televisions internal volume + and - commands.
Label this device TV Only (for use late at night without Surround
Sound). The other TV device has no programming in its Direct
Access buttons; as a result, the surround receiver’s Vol+ and
Vol- (programmed globally on the Home panel) is issued when
the TV device is selected.
DFU RC9500 Ver1_2.qxd 5/28/2004 10:33 AM Page 42