Digital Video Recorder
3
Chapter 2 ─ Installation
PACKAGE CONTENTS
The package contains the following:
Digital Video Recorder
Power Cord
User’s Manual (This Document)
DX-PC For View Software CD and User’s Manual
REQUIRED INSTALLATION TOOLS
No special tools are required to install the DVR. Refer to the installation manuals for the other items that
make up part of your system.
Figure 2 ─ 16-Channel DVR rear panel.
Video Input
Video Loop Through
RS232C Port
Factory Reset Switch
Alarm Input/Output
RS485 Port
Network Port
Video Out
Audio In/Out
Power Cord Connector
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL camera and
an NTSC monitor.
Video Input
Connect the coaxial cables from the video sources to the BNC Video In connectors.