Filter
Top Products
User’s Manual
38
Audio Settings (DEVICE Audio Tab)
Figure 29 ─ Audio setup screen.
The DVR can record up to four audio inputs. Highlight the box beside the input and press the
button.
A list of cameras appears, and you can select which camera you want associated with that audio input.
Highlight Enable Audio-Out and press the button. This toggles between enabling and disabling audio
out.
NOTE: The DVR will NOT record audio when the recording speed is set to less than 1 ips.
You can save your Audio changes by highlighting Save and pressing the button. Selecting Cancel exits
the screen without saving the changes.
Alarm-Out Settings (DEVICE Alarm-Out Tab)
The Alarm-Out screen allows you to change the settings and establish a schedule for each alarm output
from the DVR.
Figure 30 ─ Alarm-Out setup screen.
Highlighting the box beside Dwell Time and pressing the
button allows you to set the dwell time of the
alarm output. Dwell times range from 5 seconds to 15 minutes.
You can add and edit alarm output schedules on this screen. Highlight the + and press the button to add
a schedule. Highlighting the boxes under the Column heading and pressing the
button allows you to
edit the information in those boxes.