Filter
Top Products
Digital Video Recorder
43
STATUS SCREEN
Figure 36 ─ Status menu.
Event Screen (STATUS Event Tab)
Figure 37 ─ Event screen.
The Event Status screen displays the status of the DVR’s systems and inputs. Events will be highlighted,
and related channels or events will flicker for five seconds when detected.
Alarm-In, Motion, Video Loss and Text-In will be highlighted when each event is detected based on the
settings you made in the Alarm-In, Motion Detection and Text-In setup screen on the Event menu.
Check Alarm-In and Check Recording will be highlighted when each event is detected based on the settings
you made in the System Event setup screen on the Event menu.
Panic Record will be highlighted while the DVR is in the panic recording mode.
Fan Error will be highlighted when the cooling fan to the left of the power cord on the rear panel is not
working for more than four seconds.
Disk Almost Full will be highlighted when the DVR is not in the Recycle mode and the level of disk usage
reaches the Disk Almost Full percentage you made in the Monitoring setup screen on the System menu.
Disk Full will be highlighted when the DVR is not in the Recycle mode and all available storage space has
been used.