Filter
Top Products
User’s Manual
56
NOTE: The recorded data in the time range located after the yellow vertical line is the latest.
There are three view modes. Standard view, Expanded view and Compact view. Standard view (default)
displays combined recording information of all camera channels currently displayed on the screen. In the
Standard view mode, selecting the
icon located at the bottom switches to the Expanded view mode. The
Expanded view displays the recording information of each camera channel currently displayed on the screen.
Selecting the
icon in the Standard view mode switches to the Compact view mode which displays only the
toolbar. Selecting the
icon in the Compact view mode switches to the Standard view mode, and selecting
the
icon in the Expanded view mode switches to the Standard view mode.
Selecting
or
located at the bottom zooms the record table. Selecting
displays eight hours (1-minute
based), and selecting
displays 24 hours (3-minute based) at once. To move to earlier or later times that
are not shown in the current record table screen, select the arrows located at the end of the times by using
the arrow buttons on the front panel.
NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the
recording status bar displays recording information in the following priority order: Panic Pre-Event
Event Time. The color of the bar indicates different recording modes: Red for Panic, Yellow for
Pre-Event, Purple for Event, and Blue for Time.
Selecting
located at the bottom displays the Calendar Search screen.
Days with recorded video display on the calendar with white numbers.
You can select the days with recorded video by using the arrow
buttons on the front panel. Once you have selected a day, pressing
the
button displays the first recorded image of the selected date
on the screen. Once you have selected the date you want to search,
review the surrounding video by using the playback controls located
at the bottom. Refer to the Playing Recorded Video section of this
chapter for information regarding playback controls.
Selecting
located at the bottom displays the Search menu.
Go To: Displays the first or last recorded image, or searches by date and time (see
the previous Searching Video – Go To section of this chapter for more details).
Clip-Copy: Copies a video segment and saves it (see the following Clip Copy section
for more details).
Zoom: Zooms the current playback image.
Enable De-Interlace: Turns the de-interlace filter on.
Slow Play: Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
The individual playback controls at the bottom perform the following functions as described below:
Go to the previous image Play Go to the next image
Fast backward play Fast forward play
Selecting
in the top-left corner exits the Record Table Search screen.