Filter
Top Products
Digital Video Recorder
57
EVENT LOG SEARCH
Figure 43 ─ Event Log Search screen.
The DVR maintains a log of each time the Alarm Input port is activated. The Event Log Search screen
displays this list. Use the arrow buttons to highlight the event for which you would like to see video.
Pressing the (Play/Pause) button will extract the event video and display the first image of the event.
Pressing the button will start playing the “event” video segment. Pressing Playback button returns to
live monitoring.
NOTE: It is possible that no recorded image displays on the current screen. Press the Display button
and change the screen mode to 4x4. You will be able to easily see the camera have recorded video
during target time.
You can also narrow your event search by selecting the Option… button and setting up the new search condition.
You can search video from the first to last recorded
images, or you can set the start and stop times and dates.
Highlight the box beside From and press the button
to toggle between On and Off. When set to Off, you can
enter a specific Date and Time. When set to On, the search
will be from the first recorded image.
Highlight the box beside To and press the button to
toggle between On and Off. When set to Off, you can
enter a specific Date and Time. When set to On, the search
will be from the last recorded image.
Highlight the box beside Check Time Overlap and press the button. It toggles between On and Off.
You will only be able to turn the Check Time Overlap on or off if a user-defined date and time is set to
From and To. If the DVR’s date and time have been reset, it is possible for the DVR to have more than
one overlapping start and stop time. When set to On, you will be asked to select one of the overlapping
start and stop time. When set to Off, the DVR will display search results from all start times to all stop times.
Highlight the box beside Alarm-In and press the button. You can select the alarm inputs that you want
to include in your search.
Highlight the box beside Motion and press the button. You can select the cameras for which you want
any reports of motion detection.