Filter
Top Products
PLASMA MONITOR
ⅥⅥⅥ
† 17
Connections
Connections with Equipment that has a Digital Interface
Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard.
If you wish to input wide signals, perform the “RGB MODE” and “INPUT MODE” settings.
(See “Signal Identification For Raster Preset” on page 64.)
Connect the Plasma Monitor to a Computer with a Digital Output
• To connect the RGB 3 IN connector on the plasma monitor, use a DVI 29-pin signal cable (available separately).
• The RGB 3 IN connector also accepts a DVI 25-pin (digital only) cable.
• Input TMDS signals conforming to DVI standards.
• To maintain display quality, use a cable with a quality prescribed by DVI standards that is within 2 meters (6.6 feet) in length.
• Attach the supplied small ferrite cores to the DVI signal cable. See page 50 for attaching the ferrite cores.
• The AUDIO IN 1 and 2 (both RCA) can be both used for audio input. For connection, select [INPUT 1] or [INPUT 2] from the SOUND
menu.
AUDIO
OUT
LR
AUDIO
IN 2
L
(
MONO
)
R
VIDEO
OUT
S-VIDEO VIDEO
AUDIO IN 1
EXTERNAL CONTROL
RGB 1
L
(
MONO
)
RIN
IN OUT
IN
OUT
IN
RGB 2
/
DVD
/
HD
G
/
Y B
/
C
B
/
P
B
H
/
CS VR
/
C
R
/
P
R
REMOTE
RGB 3
IN OUT
C
/
L
IN
To audio right output
To audio left output
Plasma monitor
RCA
RCA
DVI connector
Ferrite core
Ferrite core
DVI connector
To digital RGB output
Equipment with a digital interface such as a
personal computer with RGB output (TMDS)