NEC 42PD3 Flat Panel Television User Manual


 
PLASMA MONITOR
65
VIDEO NTSC*1
VIDEO PAL*1 VIDEO SECAM*1
640 X 240 (15.734kHz/59.94Hz)
768 X 288 (15.557kHz/50.39Hz)
640 X 480 (31.469kHz/59.94Hz)
640 X 480 (35kHz/66.667Hz)
640 X 480 (37.861kHz/72.809Hz)
640 X 480 (37.5kHz/75Hz)
640 X 480 (43.269kHz/85.008Hz)
640 X 480 (39.375kHz/75Hz)
800 X 600 (35.156kHz/56.25Hz)
800 X 600 (37.879kHz/60.31Hz)
800 X 600 (48.077kHz/72.188Hz)
800 X 600 (46.875kHz/75Hz)
800 X 600 (53.674kHz/85.061Hz)
832 X 624 (49.725kHz/74.55Hz)
852 X 480 (31.722kHz/59.966Hz)
848 X 480 (31.02kHz/60Hz)
1024 X 768 (56.476kHz/70.069Hz)
1024 X 768 (60.023kHz/75.029Hz)
1024 X 768 (68.677kHz/84.997Hz)
1024 X 768 (60.24kHz/74.93Hz)
768 X 576 (31.389kHz/50Hz)
640 X 480 (31.47kHz/59.9Hz)
ISS-6010 NTSC*2
ISS-6010 PAL*2
VESA 480@60Hz
MAC @13''*5
VESA 480@72Hz*3
VESA 480@75Hz
VESA 480@85Hz*3
XGA-2 480@75Hz*3
VESA 600@56Hz
VESA 600@60Hz
VESA 600@72Hz*3
VESA 600@75Hz*3
VESA 600@85Hz*3
MAC @16''*3*5
I-O data wide*4
VGA WIDE (NEC1)
VESA 768@70Hz*3
VESA 768@75Hz*3
VESA 768@85Hz*3
MAC @19''*3*5
IDC-3000G PAL625P
IDC-3000G NTSC 525P
-
-
-
-
STILL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
MOTION
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Factory
settings
User
settings
RGB
MODE
-
-
4 X 3
-
4 X 3
-
-
-
-
4 X 3
4 X 3
4 X 3
-
-
-
-
16 X 9!
16 X 9
-
-
-
-
-
4 X 3
INPUT
MODE*7
-
-
NEG
NEG
NEG
-
NEG
NEG
POS
NEG
POS
POS
POS
POS
POS
-
NEG
POS
NEG
POS
POS
-
NEG
NEG
-
-
NEG
NEG
NEG
-
NEG
NEG
POS
NEG
POS
POS
POS
POS
POS
-
NEG
POS
NEG
POS
POS
-
NEG
NEG
YES
YES
YES
-
YES
YES
YES
YES
YES
YES
YES
YES
YES
-
YES
YES
YES
YES
YES
-
YES
YES
YES
YES
YES
-
YES
YES
YES
YES
YES
YES
YES
YES
YES
-
YES
YES
YES
YES
YES
-
YES
YES
Sync polarity
VerHor
VerHor
Resolution
(horizontal frequency/vertical frequency)
Presence/absence of sync
Signal Identification For Raster Preset
Appendix
*1 Convert to 640 dots x 480 lines and display.
*2 These signals cannot be displayed in the RGB3 input mode.
*3 The picture will be shaky when the moving images of video games, etc., are input. (In this case set the refresh rate to 60 kHz or less.)
*4 Only when using an I-O DATA graphic accelerator board.
*5 Use a separately sold signal adapter (mini D-Sub 15-pin) when connecting to a Macintosh computer.
For some models, make the mini D-Sub 15-pin connection using the included RGB signal cable.
These signals are Sync On Green.
*6 Make the settings to display these signals. The signals will not be displayed properly unless the correct settings are made.
NOTE:
* Input of a VGA or W-VGA signal is recommended because the display resolution is 853 x 480 pixels.
For other cases, conversion is made to 640 dots x 480 lines or 853 dots x 480 lines.
* 852 dot by 480 line signals are displayed with this resolution.
* 848 dot by 480 line signals are displayed at a resolution of 848 dots by 480 lines when "NORMAL" is selected, and converted to 853 dots by 480 lines when "FULL"
is selected.
* At the time of video input, video signals derived from poor recording conditions may create poor images.
* The sync may be disturbed when non-standard signals other than the aforementioned are input.
* Multiple screens (2 screens) can only display signals having an aspect ratio of 4:3. *3 Cannot be used with multiple screens.
* With digital inputs some signals are not accepted.
* IBM PC/AT is a registered trademark of International Business Machines Corporation.
* Macintosh is a registered trademark of Apple Computer, Inc.
* VESA is a trademark of Video Electronics Standard Association.
* DVI is an abbreviation for Digital Visual Interface.