Filter
Top Products
37
Connecting—Continued
Notes:
• Dolby Digital, DTS, DVD-Audio, and SACD can also
be fully enjoyed by using i.LINK (page 35).
• In addition to a digital connection, it’s recommended
that you also connect the D.MIX AUDIO OUT to a
spare analog audio input on your AV receiver, as this
will allow you to record audio to a cassette recorder or
CD recorder. If your AV receiver supports Zone 2, you
must make an analog audio connection in order to
select the DV-SP1000/DV-SP1000E as the input
source for Zone 2.
• Make sure that the digital output (Digital 1 Out or Dig-
ital 2 Out) is set to Dolby Digital (see page 74). Oth-
erwise you won’t get surround sound. Likewise for
DTS (see page 74).
• When playing Dolby Digital or DTS soundtracks, be
sure to select Dolby Digital or DTS decoding, respec-
tively, on your AV receiver. Refer to your AV
receiver’s manual.
L. Analog Audio Connection
(Dolby Digital, DTS, DVD-Audio &
SACD)
To fully enjoy the multichannel audio of DVD-Audio
and SACD, you need to connect the DV-SP1000/
DV-SP1000E’s 5.1-channel analog audio output to a
multichannel analog audio input on an AV receiver.
Dolby Digital and DTS soundtracks can also be fully
enjoyed with this type of connection.
Use a multichannel analog audio cable (RCA) to connect
the DV-SP1000/DV-SP1000E’s FRONT, SURR 1,
CENTER, and SUBWOOFER AUDIO OUTs to a 5.1-
channel analog audio input on the AV receiver. (You can
use several separate RCA audio cables instead of a mul-
tichannel cable.) Set the SURR MODE (AUDIO OUT)
switch to 1.
If your AV receiver supports 7.1-channels and you’re
using back surround speakers, connect the DV-SP1000/
DV-SP1000E’s SURR 2 AUDIO OUTs to the receiver’s
surround back left and right inputs as well, and set the
DV-SP1000/DV-SP1000E’s SURR MODE (AUDIO
OUT) switch to 1+2.
Notes:
• Refer to the hookup information supplied with your
AV receiver.
• You can experience Dolby Digital only with DVDs
that bear the Dolby Digital logo. Likewise, you can
experience DTS only with DVDs or CDs that bear the
DTS logo.
• DVD-Video discs may contain Dolby Digital and DTS
soundtracks. The Dolby Digital soundtrack will be
selected by default. To play the DTS soundtrack, use
the movie’s main menu and look under Language or
Audio Setup. Alternatively, use the remote controller’s
[AUDIO] button (see page 62).
• See the table on page 28 for details on how the
DV-SP1000/DV-SP1000E’s audio outputs handle
Dolby Digital, DTS, DVD-Audio, and SACD.
OUT
D. MIX FRONT SURR
1
CENTER SURR
2
L
R
L
R
SUB
WOOFER
IN
REMOTE
CONTROL
VIDEO OUT
COMPONENT
S VIDEO VIDEO
Y
P
B
PR
1
+
21
RS
232
IR
SURR MODE
(
AUDIO OUT
)
IN
12
V
TRIGGER
YPB PR
COAXIAL OPTICAL OPTICALCOAXIAL
DIGITAL
1
DIGITAL
2
VIDEO
S VIDEO
HDMI
VIDEO IN
AUDIO OUT
HD VIDEO OUT
COMPONENT
AUDIO OUT
S400
(
AUDIO
)
OUT
R
L
FRONT
SUB
SURR
CENTER
FRONT SURR
1
CENTER SURR
2
L
R
SUB
WOOFER
AUDIO OUT
Signal flow
AV receiver