Filter
Top Products
115
Other Setups
Before You
Start
Recording /
Dubbing
Playback
Editing
Connections
Other Setups
VCR functions
Initial Setups
Others
Español
Playback Setting (Cont’d)
Dolby Digital (Default:Stream)
• Using / ,select a desired setting.
Press
ENTER.
Your setting is now activated.
PCM: Convert the Dolby Digital into “PCM”
(2 channel).
When your amplifier / decoder is NOT
compatible with Dolby Digital,set to PCM.
Stream: Outputs Dolby Digital signals.
When your amplifier / decoder is compati-
ble with Dolby Digital,set to
“Stream”.
Dolby DigitalDolby Digital
DTSDTS
PCMPCM
DolbDolby Digitaly Digital
StreamStream
5. Audio Out
You can set the digital audio output.
(Follow steps 1 to 4 on page 112.)
Using / ,select “Audio Out”.
Press
ENTER.
Menu window will appear.
• Using / ,select a desired item to set.
Press
ENTER.
Menu or Option window will appear.
Referring to the explanations below,set the selected item.
PCM (Default:48kHz)
• Using / ,select a desired setting.Press
ENTER.
Your setting is now activated.
48kHz :If your amplifier / decoder is NOT compatible
with 96kHz PCM,select
“48kHz”. 96kHz
sound will be output in 48kHz.
96kHz :If your amplifier / decoder is compatible with
96kHz PCM,select
“96kHz”. 96kHz sound
will be output.
Dolby DigitalDolby Digital
48kHz48kHz
PCMPCM
96kHz96kHz
PCMPCM
Dolby DigitalDolby Digital
Audio OutAudio Out
Dynamic Range ControlDynamic Range Control
Fast Forward with AudioFast Forward with Audio
Note
When playing back disc with copyright protection
• Even if you select
“96kHz”,the sound will be down
sampled at 48kHz.
Note
When playing back a DVD-RW disc recorded
in VR mode
• If the audio on a disc is recorded in Dolby Digital
format, set Dolby Digital to PCM so that you can
switch to main audio (L), sub audio (R), or a mix of
both (L / R) with your amplifier / decoder.
4380_110-120.qx3 05.11.16 2:40 PM Page 115