Filter
Top Products
Before You
Start
Recording /
Dubbing
Playback
Editing
Connections
Other Setups
VCR functions
Initial Setups
Others
Español
131
Others
Troubleshooting (Cont’d)
Symptom Solution
C
H
A
N
N
E
L
TV channels cannot be changed. • Check if the connections are made securely and correctly.
• Check if the cables are not damaged.
• Try Channel Setting by following the steps on pages 22-23.
Only specific channels do not appear. • The channels may be set to be skipped.
The external input channels (such as
L1 or L2) cannot be skipped.
•
This unit does not skip the external input channels.
This is not a malfunction.
Symptom Solution
C
H
A
N
N
E
L
TV channels cannot be changed. • Check if the connections are made securely and correctly.
• Check if the cables are not damaged.
• Try Channel Setting by following the steps on pages 22-23.
Only specific channels do not appear. • The channels may be set to be skipped.
The external input channels (such as
L1 or L2) cannot be skipped.
•
This unit does not skip the external input channels.
This is not a malfunction.
Symptom Solution
R
E
C
O
R
D
I
N
G
Recording is impossible.
•
This unit cannot record a program that contains copy protection
signal. This is not a malfunction.
• The space of the recording media may be used up. Try deleting
unnecessary titles from the Original List, or exchange it with
the recordable media.
• The maximum number of titles or chapters has exceeded.
Delete the unnecessary titles to make enough space or insert a
new recordable media.
• Check if the connections are made securely and correctly.
• Copy-once programs can only be recorded on a CPRM
compatible VR mode DVD-RW.
• Check if the disc is not protected or finalized.
Undo the protection or the finalization.
• DVD-RW once formatted with other DVD recorders cannot
be recorded on this unit. This is not malfunction.
• Video mode DVDs recorded by other DVD recorders cannot
be used on this unit unless finalized.
• Check if the connections are made securely and correctly.
The image from the external device
cannot be displayed or recorded.
• The internal clock of the unit may have been stopped due to a
power failure that lasted for more than 30 seconds. Reset the
clock. (See pages 24-26.)
Recording on the DVD disc is impossible.
• Try pressing INPUT SELECT repeatedly.
•
Turn on the all connected devices.
• Check if the connections are made securely and correctly.
Timer Recording cannot be performed.
Recording to a videotape is impossible. • Check if a videotape is inserted.
• Check if a videotape has a record tab intact.
4380_121-137.qx3 05.11.16 2:42 PM Page 131