Filter
Top Products
23
Initial Setups
Before you
start
Recording /
Dubbing
Playback
Editing
Connections
Other Setups
VCR functions
Others
Español
Initial Setups
Channel Setting (Cont’d)
Adding / Deleting Channels
The channels you no longer receive or seldom watch can be
deleted from the memory. You can also add channels manu-
ally into memory.
1
Press SETUP.
“Easy Setting Menu” or “Advanced Menu” will appear.
2
Using / ,select “Initial Setup”
Press ENTER.
OSD Language
Clock SettingClock Setting
Channel SettingChannel Setting
PlaybackPlayback
RecordRecord
DisplayDisplay
Reset to factory defaultReset to factory default
DVD MenuDVD Menu
HDD MenuHDD Menu
Initial SetupInitial Setup
Timer ProgramTimer Program
Easy Setting MenuEasy Setting Menu
Advanced MenuAdvanced Menu
HDD MENUHDD MENU
Initial SetupInitial Setup
DVD Disc FVD Disc Forormatmat
DVD Recording FVD Recording Forormatmat
FinalizFinalize
Disc ProtectDisc Protect
Delete PlaDelete Playlistylist
DVD MenuDVD Menu
HDD MenuHDD Menu
Initial SetupInitial Setup
Timer ProgramTimer Program
Easy Setting MenuEasy Setting Menu
Advanced MenuAdvanced Menu
6
Using / ,select “Auto Preset”. Press ENTER.
The unit will start getting channels available in your area.
Wait for several minutes for channel scanning to finish.
After Auto Preset has stopped:
• Use CHANNEL / or the Number
Buttons
to change the channel.
• When you use
the Number Buttons, press 0
first for a single digit number.
• Use
INPUT SELECT to select an external
input channel (
“L1” or “L2”) of this unit.
Auto Presetuto Preset
3
Using / ,select “Channel Setting”.
Press
ENTER.
Channel Setting Menu will appear.
4
Using / ,select “Manual Preset”.
Press
ENTER.
Option window will appear.
5
Using / ,select the channel number to add or
delete.
•
Use / or CHANNEL / to change the
channels one by one, or use
the Number Buttons
to select the channel directly
.
6
Using / ,select “Add” or“Delete”.
Press
ENTER.
The channel number will be added or deleted from
the channel memory. Then, the next channel
number will appear so that you can continue adding
or deleting channels.
7
Press SETUP to exit.
AddAdd
CH 1CH 1
DeleteDelete
AddAdd
CH 1CH 1
DeleteDelete
TV ATV Audio Selectudio Select
ManManual Presetual Preset
Auto Presetuto Preset
Channel SettingChannel Setting
Note
• External Input Channels (“L1” or “L2”) cannot be
skipped.
• You cannot change the channel while the unit (HDD,
VCR or DVD) is in the recording, OTR or Timer
Recording mode.
• If the auto presetting is cancelled during presetting,
some of the channels not yet preset may not be
received.
• The selection will depend on how you receive the TV
channels.
• To cancel the Auto Preset during scanning:
Press
RETURN .
4380_017-028.qx3 05.11.16 2:26 PM Page 23