Filter
Top Products
19
Connections
Before You
Start
Recording /
Dubbing
Playback
Editing
Connections
Other Setups
VCR functions
Others
Español
Initial Setups
HDD/DVD
COAXIAL
COAXIAL
DIGITAL
AUDIO OUT
Connection to an Audio System
• When you change the connections,all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
AUDIO OUT
L
R
HDD/DVD/VCR
HDD/DVD
AUDIO
OUT
L
R
Stereo system
AUDIO
Method 1
Analog audio
input jacks
Digital audio
input jack
AUDIO OUT
DIGITAL
AUDIO OUT
Method 2
Audio cable
(supplied)
Digital Coaxial
cable
(commercially
available)
Dolby Digital decoder,
MD deck or DAT deck
This unit
* To complete these settings.(See pages 115–116.)
If output is Dolby Digital encod-
ed audio,connect to a Dolby
Digital decoder.
Unless connected to a Dolby
Digital decoder.
Connecting to an MD deck or
DAT deck.
-
-
-
Stream
PCM
PCM
Initial Setup >Playback >Audio Out >
PCM
Dolby Digital
Setting
Connection
Note
• By connecting this unit to a Multi-channel Dolby
Digital decoder, you can enjoy high-quality Dolby
Digital 5.
1 channel surround sound as heard in the
movie theaters.
• The audio source on a disc in a Dolby Digital 5.
1
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the
speakers.
or
4380_017-028.qx3 05.11.16 2:26 PM Page 19