Filter
Top Products
25
Initial Setups
Before you
start
Recording /
Dubbing
Playback
Editing
Connections
Other Setups
VCR functions
Others
Español
Initial Setups
Clock Setting (Cont’d)
Manual Clock Setting
1
Press SETUP.
“Easy Setting Menu” or “Advanced Menu” will appear.
2
Using / ,select “Initial Setup”.PressENTER.
3
Using / ,select “Clock Setting”.
Press
ENTER.
Clock Setting Menu will appear.
4
Using / ,select “Clock Setting”.
Press
ENTER.
Clock SettingWindow will appear.
5
Using / ,move to the item your want to set,and
using / ,change the setting to suite your prefer-
ence.
6
When all the information is entered,press ENTER.
Your setting is now activated.
Although seconds are not displayed,they will be
counted from zero.
7
Press SETUP to exit.
ClocClock Settingk Setting
MARMAR / / AMAM:
(Tue)ue)
15 20052005 11 2626
DaDaylight Saylight Saving TimeTime
Auto Clocuto Clock Settingk Setting
ClocClock Settingk Setting
ClocClock Settingk Setting
OSD Language
Clock SettingClock Setting
Channel SettingChannel Setting
PlaybackPlayback
RecordRecord
DisplayDisplay
Reset to factory defaultReset to factory default
DVD MenuDVD Menu
HDD MenuHDD Menu
Initial SetupInitial Setup
Timer ProgramTimer Program
Easy Setting MenuEasy Setting Menu
Advanced MenuAdvanced Menu
HDD MENUHDD MENU
Initial SetupInitial Setup
DVD Disc FVD Disc Forormatmat
DVD Recording FVD Recording Forormatmat
FinalizFinalize
Disc ProtectDisc Protect
Delete PlaDelete Playlistylist
DVD MenuDVD Menu
HDD MenuHDD Menu
Initial SetupInitial Setup
Timer ProgramTimer Program
Easy Setting MenuEasy Setting Menu
Advanced MenuAdvanced Menu
5
If you do not know the PBS channel number
in your area :
Using / ,select “Auto”.PressENTER.
Your setting is now activated.
If you know the PBS channel number
in your area :
Using / ,select “Manual”. Press ENTER.
Input window will appear.
Using
the Number Buttons or / ,enter the
PBS channel number. Press
ENTER.
Your setting is now activated.
If you want to set the clock manually and to
cancel the Auto Clock Setting :
Using / ,select “Off”. Press ENTER.
The Auto Clock Setting will be canceled.
• The default setting is
“Auto”.
6
Press SETUP to exit.
7
Press POWER to turn off the unit.
This unit will search for the clock time only when
the power is off. Leave it off for several minutes to
give the unit a time to set the clock.
CHCH 1
Set Channel NoSet Channel No.
Note
• The clock may set itself automatically after you
connect the antenna / cable signal to this unit and
plug in the power cord. In this case, the current time
will appear on the Front Panel Display.
• If the current time is not displayed or the displayed
clock time is not correct, set the clock manually.
Note
• Your clock setting will be lost if either there is a
power failure or this unit has been unplugged for
more than 30 seconds.
4380_017-028.qx3 05.11.16 2:26 PM Page 25