Sylvania HDRV200F DVD VCR Combo User Manual


 
39
Recording / Dubbing
Before you
start
Recording /
Dubbing
Playback
Editing
Connections
Other Setups
VCR functions
Others
Español
Initial Setups
6
Press REC / OTR (HDD / DVD) repeatedly to
change the recording time.
The recording time will be extended by 30 minutes
every time you press
REC / OTR (HDD / DVD).
The maximum recording time is 8 hours.
With HDD / DVD OTR, the recording time that
exceeds the remaining time of the recording
media will not be displayed.
To change the recording time during the
One Touch Recording, Press
REC / OTR (HDD /
DVD) repeatedly.
7
When OTR ends,the unit will turn off automatically
except under conditions listed below.
- If a Timer Recording is programmed to start in 5
minutes.
- During playback of HDD / DVD / VCR.
- During recording of HDD / DVD / VCR.
- While displaying menus or information on the
screen.
To cancel the OTR in progress,press STOP C.
0:30
(Normal Recording)
8:00 7:30
1:00
I
HDD Rec 0:06:50 CH8
HDD MODE
OTR (0:30)
65:56LP
One Touch Recording (OTR)
This is a simple way to set the recording time in blocks of
30 minutes.
If you are recording to the HDD,press
HDD first.
If you are recording to a disc,press
DVD first.
Preparing for OTR:
Check that the recording media has enough recordable
space for the time you set.
If you are recording to a DVD,insert a recordable disc.
Use only the HDD or CPRM-compatible VR mode
DVD-RW discs for recording copy-once programs.
(See page
31.)
1
Turn on the TV. Select the appropriate external input
channel. (See page
18.)
2
Using REC MODE,select a Rec Mode.
Refer to Rec Mode on page 30.
You can check the current Rec Mode by pressing
REC MONITOR.
3
If you are using a DVD-RW disc,make sure that the
recording format is set to the desired mode.
Refer to Formatting a Disc on pages 3435.
4
Using CHANNEL / or the Number
Buttons
,select a desired channel to record.
5
Press REC / OTR (HDD / DVD).
Recording will start.
I
HDD Rec 0:06:50 CH8
65:56LP
HDD MODE
DVD-R
DVD-R
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
VR
HDDHDDHDD
Note
The remaining recording time will be displayed on the
Front Panel Display during a One Touch Recording.
Press
DISPLAY to see it on the TV screen.
You cannot pause a One Touch Recording.
The unit will turn off automatically under the
following conditions.
-When a power failure occurs.
4380_029-065.qx3 05.11.16 2:28 PM Page 39