Filter
Top Products
15
2. Basic operations
Changing the soft effect amount
On the BODR menu, turn [F3], and set the soft effect amount using the SOFT item.
A setting of “0” means that the soft effect is OFF.
Setting the border color
On the BODR menu, turn [F4], and set the border color using the COLR item.
When USR1 to 4 (user colors) has been selected, the color can be adjusted on the USR1 to 4 menu.
Adjusting the border color
When USR1, 2, 3 or 4 has been selected, the border color can be adjusted.
Use of USR1 to 4 is shared by the background color, fill color and edge color.
Press the [FUNC] switch to light its indicator, and then press the [WIPE] switch to display the WIPE menu.
Turn [F1] to display the USR1 to 4 (user color) menu.
Turn [F2], [F3] or [F4] to adjust the color (HUE, SAT or LUM).
ＵＳＲ１
２／５
ＨＵＥ
１００
ＳＡＴ
１００
ＬＵＭ
１００
Operation Parameter Description of setting Setting range (TBD)
F2 HUE Hue 0 to 359
F3 SAT Saturation 0 to 100
F4 LUM Luminance 0 to 108