Filter
Top Products
34
3. Setup
3-6. Adjusting the output signal phase
The phase of the output video signals can be adjusted.
Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP
menu.
Turn [F1] to display the OUPHS menu.
Turn [F2], and select 0H or 1H using the SYS item.
0H: The output video signals are output to the system REF signal with using in-phase.
The frame synchronizer function is ON for all input signals.
1H: The output video signals are output to the system REF signal with 1H delay.
Turn [F3] to adjust HPHASE using the H item, and turn [F4] to adjust VPHASE using the V item.
HPHASE can be adjusted within a range of –0.5H to +0.5H and VPHASE within a range of –100H to +100H.
ＯＵＰＨＳ
６／１４
ＳＹＳ
１Ｈ
Ｈ
ー１０００
Ｈ
ー１００
０Ｈ
Output video signal phase adjustment
(The numbers given are provisional.)
Phase Video format Adjustment range
HPHASE
1080i/59i −1094 to 1094
1080/50i −1314 to 1314
720/59p −819 to 819
720/50p −984 to 984
480/59i −852 to 852
576/50i −858 to 858
VPHASE Same for all formats −100 to 100