Filter
Top Products
30
3. Setup
3-3. Selecting the video format
One system (input/output signal) video format can be selected. More than one format cannot be selected.
If HD is selected, SDI or HD analog component can be selected for each input. (See 3-1-1)
Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP
menu.
Turn [F1] to display the FORMT menu.
Turn [F2], select the format using the MODE item, and press the [F4] switch (EXEC) to enter the selection.
An asterisk (
) appears at the left of the format currently selected.
ＦＯＲＭＴ
４／１４
ＭＯＤＥ
＊１０８０／５９ｉ ＥＸＥＣ
１０８０／５０ｉ
７２０／５９ｐ
７２０／５０ｐ
４８０／５９ｉ
５７６／５０ｉ
Display HD/SD Signal format Input signals
1080/59i HD 1080/59.94i SDI / analog HD component
1080/50i HD 1080/50i SDI / analog HD component
720/59p HD 720/59.94p SDI / analog HD component
720/50p HD 720/50p SDI / analog HD component
480/59i SD 480/59.94i SDI
576/50i SD 576/50i SDI