Filter
Top Products
39
3. Setup
3-9. Status displays
The statuses can be displayed.
Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP
menu.
Turn [F1] to display the STATS menu.
ALM (alarm): Indicates a fan and/or power supply alarm.
FAN
Fan alarm
POWR
Power supply alarm
F, P
Fan alarm and power supply alarm
NO No alarm information
OPT (option): Indicates whether or not an optional board is provided.
ANLG The HD analog component option has been inserted.
NO The HD analog component option has not been inserted.
VER (version): Indicates the software version.
ＳＴＡＴＳ
１４／１４
ＡＬＭ
ＦＡＮ
ＯＰＴ
ＡＮＬＧ
ＶＥＲ
１．００
ＮＯ
ＰＯＷＲ
Ｆ， Ｐ
ＮＯ
3-10. Initialization
All the settings can be returned to the factory defaults.
(When they are returned, the images in the frame memory will also be initialized.)
Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP
menu.
Turn [F1] to display the INIT menu.
Press [F2] to initialize the settings. The “INIT?” message appears.
To initialize the settings, turn [F2] to select YES, and then press the [F2] switch.
To cancel the initialization, turn [F2] to select NO, and then press the [F2] switch.
ＩＮＩＴ
１３／１４
ＩＮＩＴ
ＥＸＥＣ
ＩＮＩＴ
１３／１４
ＩＮＩＴ？
ＮＯ
ＹＥＳ