Panasonic AV-HS300 Flat Panel Television User Manual


 
8
1. Parts and their functions
1-3. Wipe area
Wipe pattern selector switches [WIPE PATTERN / FUNC]
These are used to select the wipe patterns. Each switch is used to select one
of the nine wipe patterns.
The indicator of the switch for the selected pattern lights (in amber).
When the [FUNC] switch (
) has been pressed and its indicator is lighted, the
function setting menu is selected, and the indicator lights up green.
Wipe direction selector switch [N N/R R]
This is used to select the wipe direction. See 2-2-2
[N]: For setting the wipe direction to the normal direction.
[N/R]: To switch the wipe direction between normal and reverse when the execution of the transition has
been completed.
[R]: For setting the wipe direction to the reverse direction.
[FUNC] switch
When this switch is pressed, its indicator lights up green. If a wipe pattern selector switch is pressed while
its indicator is lighted, the wipe pattern selector switch lights up green, and the setting menu of the function
indicated underneath the switch appears on the LCD display.
[TIME]: For setting the auto transition time. See 2-1-5
[WIPE]: For setting the wipe border and soft effect. See 2-2-3
[CBGD]: For setting the color background. See 2-4
[KEY]: For setting the key. See 2-3
[EDGE]: For setting the key edge. See 2-3-5
[FRZ]: For displaying the freeze status display and setting freezing. See 2-5
[MEM]: For setting the preset memory or frame memory. See 2-6, 2-7
[XPT]: For displaying and setting the crosspoint assignment. See 3-4
[SETUP]: For performing the system settings. See 3
Freeze status indicator LED
When this LED is lighted, it means that one of the input signals is frozen.
When the [FUNC] switch (
) is pressed and its indicator is lighted and then the [FRZ] switch is pressed, the
freeze status is indicated for each input. (An asterisk (
) appears above the name of a frozen crosspoint.)
Bear in mind that since the signals are frozen while the indicator is lighted, the unit’s output will remain
unchanged even if the input images change.
(When crosspoints 3 and 5 are frozen)
FRZ 
 1/2 
 FRZ:   * *
 XPT: 1234567