Panasonic AV-HS300 Flat Panel Television User Manual


 
26
3. Setup
3-1. Setting the input signals
3-1-1. Setting the input signals (IN 1 to 5)
If HD has been selected as the system format, SDI or analog HD component can be selected for each input.
This selection is possible only when the analog HD input option has been connected.
Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP
menu.
Turn [F1] to display the IN1 to 5 menu.
Turn [F2], select the input signals using the SIG item, turn [F3], and select SDI or ANLG (analog HD
component) using the MODE item.
IN1-5
1/14
SIG 
IN1
MODE
SDI
IN2
IN3
IN4
IN5
ANLG
3-1-2. Setting the input signal frame synchronizer
The frame synchronizer can be set to ON or OFF for each input.
Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP
menu.
Turn [F1] to display the FS menu.
Turn [F2], select the input signals using the SIG item, turn [F3], and select ON or OFF for the frame
synchronizer using the FS item.
FS   
3/14
SIG 
IN1
FS  
ON
IN2
IN3
IN4
IN5
OFF
AVDL function is active while the frame synchronizer function is set to OFF.
The AVDL function automatically adjusts the input image signal phase to the horizontal synchronization
reference signal phase.
For details, refer to “3-6. Adjusting the output signal phase”.