Filter
Top Products
37
3. Setup
Setting the gateway
On the SETUP menu, turn [F1] to display the GW (Gateway) menu.
Turn [F2] to select the setting location. An asterisk ( ) appears at the setting location.
Turn [F3] to set the number, and press the [F3] switch to enter the setting. If the setting is not entered even
though it has been changed, “ ! ” appears above the setting location, and when the setting location is moved
by turning [F2], the value prior to the change is restored.
ＧＷ
９／１４
＊
０． ０． ０． ０
Setting the MAC address
On the SETUP menu, turn [F1] to display the MAC menu.
The MAC address now appears.
ＭＡＣ
１０／１４ ００８０４５１２３４５６