Filter
Top Products
36
RQT9131
Advanced timer recording
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Icons
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (➡ 34,
step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
∫ Confirm the History List
1 Press the “Green” button.
2 Press [3, 4] to select the programme and press [OK].
≥Reason why the timer recording failed or similar can be
confirmed.
≥Press the “Green” button to return to the previous screen.
∫ To exit the timer recording list
Press [PROG/CHECK].
[Note]
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
≥Only 1 programme can be set to timer record on the disc.
≥Timer recording will not be performed if the clock is not set.
≥If the “TV system” (➡ 87) in the Setup menu was modified to
playback a disc or a title while on timer recording standby, return
the setting to original before the recording is started.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥When you programme successive timer recordings to start
immediately one after the other, last 1 minute of earlier programme
will not be recorded unless it can perform 2 programmes
simultaneous recording.
First 1 minute of the following programme is not recorded either if
the following programme set to be recorded is also BD.
≥If the start of 2 timer recordings overlap with each other when 2
programme simultaneous recording is not possible, the programme
with the earlier start time will be recorded.
Starting of the timer recording while executing other operation
➡ 99
Check, change or delete a programme
F Red :Timer recording standby is activated.
Grey:Timer recording standby is not activated.
[ This programme is currently recording.
Part or all of the programme will not be recorded since
the programme is overlapping.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not
recorded.
The programme did not complete recording because
the disc is dirty or some other reason.
Timer programmes set to Auto Renewal Recording
(➡ 35).
Timer programmes that will be relief recorded to the
HDD.
OK: Displayed if the recording can fit in the
remaining space.
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the disc.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.
Date Service Name Drive/Mode Space
New Timer Programme
OK
RETURN
Page
Page
CH
Timer Off
Total 0/32 DELETE
History List
Timer Recording
1:58 SP
DVD
30:24 SP
HDDRemain
OK
OK
OK
MON 12/1 1:59 - 2:55 2 ABC TV HDD/XP
MON 12/1 2:06 - 2:08 22 ABC TV HDD/XP
SUN 12/7 2:16 - 2:17 2 ABC TV HDD/XP
MON 12/01/08 1:30
Notes on timer recording
Programme
Programme
Recorded Recorded
Not recorded
DMRBW500GN-RQT9131-L_eng.book 36 ページ ２００８年５月１２日 月曜日 午前９時３７分