Filter
Top Products
85
RQT9131
(All factory default settings are indicated with underlined text.)
(All factory default settings are indicated with underlined text.)
Picture
Still Mode
Select the type of picture shown when you pause play (➡ 114,
Frames and fields).
[Automatic
]
[Field] Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
[Frame] Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected. (The
picture is clearer and finer.)
Seamless Play
Select the play mode between playlist chapter segments and
partially deleted titles.
≥It is not valid for titles in DR mode or AVCHD videos.
[On
] The chapters in playlists are played seamlessly. This does
not work when there are several audio types included on
the playlist and when using Quick View (PLAYa1.3).
Additionally, the positioning of chapter segments may
change slightly.
[Off] The points where chapters in playlists change are played
accurately, but the picture may freeze for a moment.
NTSC Video Output
Select how the NTSC image is output.
[NTSC]
Output as NTSC.
[PAL60
] Convert and output as PAL60.
Select this when connected to the PAL format TV.
Sound
Dynamic Range Compression
[BD-V] [DVD-V]
Change the dynamic range for late night viewing.
[On] [Off
]
Bilingual Audio Selection
(Only when recording from DV input)
Select whether to record the main or secondary audio type when:
≥Copying to a DVD-R, DVD-RW (DVD-Video format), +R and
+RW.
≥“Rec for High Speed Copy” is enabled. (➡ 84)
≥Recording sound in LPCM (➡ 86, “Audio Mode for XP
Recording”).
[M 1
][M2]
≥You cannot select the audio on this unit when recording from an
external source, such as when copying from a video cassette
recorder (except from DV equipment connected to this unit’s DV
input terminal). Select the audio on the other equipment.
≥When recording from the unit’s DV terminal, select the type of
audio recording from “Audio Mode for DV Input” (➡ 86).
Digital Audio Output
≥Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
It will be converted to 48 kHz regardless of the setting in
following cases.
≥The signals have a sampling frequency of over 96 kHz.
≥The disc has copy protection.
≥“BD-Video Secondary Audio” is set to “On”. ([BD-V])
[On] Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with a
sampling frequency of 96 kHz.)
[Off
] Signals are output as 96 kHz. (Choose when the
connected equipment can process signals with a
sampling frequency of 96 kHz.)
Priority Setting
Select priority items for “Dolby D/Dolby D +/Dolby TrueHD”,“DTS/
DTS-HD”,“MPEG” and “BD-Video Secondary Audio”.
≥See “Enjoying High Bit rate Audio and Video of BD-Video”.
(➡ 43)
[Secondary
Audio]
“BD-Video Secondary Audio” is set to “On”,
and “Dolby D/Dolby D +/Dolby
TrueHD”,“DTS/DTS-HD”,“MPEG” are fixed to
“PCM”.
[Audio Quality] “Dolby D/Dolby D +/Dolby TrueHD”,“DTS/
DTS-HD”,“MPEG” are set to “Bitstream”, and
“BD-Video Secondary Audio” is fixed to “Off”.
–If the connected equipment can only
decode Dolby Digital and DTS, Dolby
Digital Plus, Dolby TrueHD, and DTS-HD
will be output as Dolby Digital or DTS.
–If the connected equipment can only
decode one of either Dolby Digital and
DTS, please select “User Setting” and set
desire audio formats that cannot be
decoded.
[User Setting] Items in “Dolby D/Dolby D +/Dolby
TrueHD”,“DTS/DTS-HD”,“MPEG” and “BD-
Video Secondary Audio” can be set
individually.
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
MPEG
Select to output Dolby Digital, Dolby Digital plus, Dolby TrueHD,
DTS Digital surround, DTS-HD High Resolution Audio, DTS HD
Master Audio, or MPEG as bitstream or PCM.
[Note]
≥Not making the proper settings may result in noise.
≥If the unit is connected with the HDMI AV OUT terminal, the
specifications of the connected equipment take preference
over this unit and audio selected in these items may not be
output (e.g., when a television is connected, the HDMI audio
output of this unit is limited to down-mixed 2ch.)
[Bitstream] Select “Bitstream” when the connected equipment
can decode the respective audio format.
–Connect equipment supporting HDMI Ver. 1.3
and use a High Speed HDMI Cable in order to
output high bit rate audio such as Dolby Digital
Plus, Dolby TrueHD, DTS-HD High Resolution
Audio or DTS-HD Master Audio.
[PCM
] Select “PCM” when the connected equipment
cannot decode the respective audio format.
Refer to the operating instructions for connected
devices to verify whether or not they can decode
each of the audio formats.
BD-Video Secondary Audio
(
[BD-V]
with secondary audio)
Turn on/off the clicking sound on the menu and audio with
secondary video.
[On
] The sampling frequency is converted to 48 kHz.
Audio will be converted to Dolby digital during
playback of the BD-Video with secondary audio
when “Bitstream” (➡ above) is selected.
[Off]
Output in original audio method.
Changing the unit’s settings
DMRBW500GN-RQT9131-L_eng.book 85 ページ ２００８年５月１２日 月曜日 午前９時３７分