Filter
Top Products
68
RQT9131
Playing music
Operations during play
Useful functions during music play
Stop
Press [∫].
Pause
Press [;].
Press [;] again or [1] (PLAY) to restart play.
Search
Press [6] or [5].
Press [1] (PLAY) to restart play.
Skip
During play or while paused,
press [:] or [9].
Skip to the track you want to play.
≥Each press increases the number of skips.
Register a track to
the “My Favourites”
[HDD]
While Music list screen is displayed
Press [3, 4] to select the track and press the “Green” button.
≥Up to 99 tracks can be registered.
Properties
[HDD]
While Music list screen is displayed
1 Press [OPTION].
2 Press [3, 4] to select “Properties” and press [OK].
≥To exit the Properties screen, press [OK].
Repeat Play
Random
1 Press [DISPLAY].
2 Press [3, 4] to select “Play” and press [1].
3 Press [3, 4] to select “Repeat Play” or “Random” and press [1].
4 Press [3, 4] to select the item.
≥Repeat Play
“All”: Repeatedly playback the selected album, etc.
“Track”: Repeatedly playback the selected track
≥Random
“On”: Randomly playback the selected album, etc.
“Off”
Re-master
This feature gives you a more natural sound by adding higher frequency signals not recorded on the track.
1 Press [DISPLAY].
2 Press [3, 4] to select “Sound” and press [1].
3 Press [3, 4] to select “Sound Effects” and press [1].
4 Press [3, 4] to select “Re-master1” or “Re-master2”.
≥“V.Surround1” or “V.Surround2” is displayed, but there is no effect even if it is set.
≥This function is effective for audio from the HDMI terminal or the DIGITAL AUDIO OUT terminal only when
“Digital Audio Output” is set to “PCM”. (However, in this case, audio is output as 2ch from the DIGITAL AUDIO
OUT terminal.)
Display Still
Pictures
(Slide show)
Sample pictures in this unit or pictures stored on the “Album View” of the HDD can be played back as slide show
during playback of the music.
While playing the music
Press the “Red” button.
Change the pictures to display
1 Press [OPTION].
2 Press [3, 4] to select “Select Picture Album” and press [OK].
3 Press [3, 4] to select the album and press [OK].
To end the slide show
Press [RETURN].
≥It will also end when the music is stopped.
Playing music
continuously even
after turning off
power to the
television
When the unit is connected to a Panasonic TV (VIERA) that supports HDAVI Control 2 or HDAVI Control 3 and
an amplifier/receiver supports HDAVI Control, the unit is turned off if the power to the television is turned off,
since “Power off link” (➡ 74) operates.
The following operations make it possible to keep the power of the unit ON and to play music continuously.
1 While playing music
Press [OPTION].
2 Press [3, 4] to select “TV Power Off” and press [OK].
≥Sound may be discontinued for several seconds when the power to the television is turned off.
≥If the operation mentioned above is executed while audio is output from the television, the sound may not be
output from the amplifier/receiver. It is recommended to set the amplifier/receiver beforehand so that audio will
be output from the amplifier/receiver.
Please select the album to start slide show.
RETURN
OK
While playing music a picture slide show
can be displayed.
Select Picture Album
Sample Pictures
My Favourites
My Travel
DMRBW500GN-RQT9131-L_eng.book 68 ページ ２００８年５月１２日 月曜日 午前９時３７分