Filter
Top Products
29
RQTV0134
Preparation
≥Select the drive with the scheduled recording you want to cancel
by pressing [DRIVE SELECT].
[1] When unit is on
Press [∫, STOP].
≥Confirmation screen appears.
[2] Press [2, 1] to select “Stop Recording” and
press [ENTER].
≥Recording stops and the scheduled recording is deleted. (Daily
and weekly schedules remain and scheduled recording will
start as programmed.)
[1] Press [SCHEDULE].
[2] Press [
3, 4] to select the program and press
[SUB MENU].
[3] Press [
3, 4] to select “Schedule set to Off” and
press [ENTER].
Cancelled icon is displayed in left column.
≥Be sure to select “Schedule set to On.” in step 3 before the
scheduled time to put the program on recording standby.
Note
≥When a scheduled recording program cannot start (no tape, etc.),
“Schedule set to On.” is cancelled one minute before the start time.
(If a daily or weekly scheduled recording program cannot start, the
following daily or weekly scheduled recording will not be affected.)
[VHS]
[VHS]
If, at the beginning of a scheduled recording, there is not enough
tape remaining to complete the recording, the SP/EP function will
automatically run the tape at EP speed for recording. This ensures
that the entire program will be recorded. If EP mode is not enough to
stretch the remaining tape to fit the whole program you will not be
able to record the whole TV program.
≥It is not possible to automatically activate VP mode.
≥The tape length must be set correctly. (l 58)
≥Some tapes may not work correctly.
≥If the recording mode changes from SP to EP during a scheduled
recording, some picture distortion occurs at that point.
Even when the unit is turned off, you can display the scheduled
recording list by pressing [SCHEDULE].
[1] Press [SCHEDULE].
Icon explanations (A)
¥: Currently recording
W: Programs are overlapped. Recording of the program with the
later start time starts when the earlier program finishes
recording.
: Scheduled recording standby is cancelled. Recording will not
start at the scheduled time.
n: You stopped a weekly or daily scheduled recording. The icon
disappears when the next scheduled recording starts.
F: The disc was full. (not enough space)
: The TV program may not be recorded due to copy-protect. (disc)
X: Recording stopped (Dirty disc or tape, etc.)
Check (B)
OK: Recordable (disc)
# (Date): The last day of daily or weekly recording. (disc)
!: It may not be possible to record because:
≥the disc is write-protected.
≥there is no more space left (disc).
≥the number of possible titles has reached its
maximum.
≥the tape tab is broken off.
≥there is no tape/the tape is full.
≥the remaining tape time is not calculated.
Overlap: When the date and time overlap with another scheduled
recording, only a part of the program can be recorded.
--: All other cases (tape)
[2] Press [3, 4] to select the program.
≥You may also select program by inputting a 2-digit number
using the numeric buttons.
e.g.: “5”: [0] )[5]
“15”: [1] )[5]
≥Press [2, 1] to move to the preceding or following page.
[3] Press [¢, CANCEL] or [CH, ADD/DLT] to delete,
≥You cannot delete programs that are currently recording.
or press [ENTER] to change.
≥The scheduled recording setting screen appears.
[4] If you pressed [ENTER] in step 3,
Use [3, 4, 2, 1] to change and press [ENTER].
[5] Press [RETURN].
∫ Cancel scheduled recording that has
already begun
∫ Release program from recording standby
∫ Auto SP/EP mode
Channel
No Date
On
Schedule
List
DV
VH
Remain
New Sche
01 5/ 6 Sat 6:10 4
Scheduled recording
Video tape (e.g.: 60-minute cassette)
1st program
(30 min)
30 min at SP
2nd program (60 min)
15 min
at SP
45 min
at EP
∫ Check, change or delete programs
Channel
No Date
On Check
Off Drive
Mode
Schedule
List
DVD
VHS
5/ 5 Fri 6:11 PM
Remain 1:00 XP
:
New Scheduled Recording
A
B
Scheduled Recording
M6VP&PC.book 29 ページ ２００６年２月６日 月曜日 午後３時２０分