PICTURE
SOUND
DISPLAY
10
14
14
50
50
49
13
55
49
13
6
6
6
5
6
49
11
No picture.
!
Press and hold and on the unit at the same time for more than
5 seconds. The function is switched to half-picture (INTERLACE).
STOP PLAY
Television reception worsens
when the unit is connected.
î
You may need to use a signal amplifier.
Check the antenna connection and the alignment of your antenna.
The TV picture format is not
set correctly.
î
Check the [TV Aspect] setting in the Connection Setup menu.
The picture flickers.
î
Adjust the picture. Read the operating instructions for the TV.
No on-screen messages.
î
Change the [On-Screen Messages] setting the Display Setup menu.
No sound. Distorted sound.
Volume set to quiet.
î
î
î
Check the connections.
If you connected an amplifier, check the input mode.
Switch off the V.S.S. function if it causes problems.
It is not possible to hear the
desired sound type.
!
!
Press to select the desired sound type.
Change the appropriate setting in the Sound Setup menu.
AUDIO
The sound cannot be set for
stereo or NICAM broadcasts.
î
î
Connect external devices with audio cables even if you use a digital connection.
You can change the sound type when using DVD-RAM.
There is picture interference.
î
The sound cannot be switched on some discs.
î
Check the connection to the TV, e.g. AV1.
î
The [TV System] setting does not match that on the disc.
In mode, press and hold and on the unit for more
than 5 seconds. This switches the unit from PAL to NTSC or vice versa.
!
STOP STOP OPEN/CLOSE
If you need help
No functions.
î
î
î
î
An incorrect remote control code was selected.
Check the batteries.
Point the remote control at the sensor on the unit.
Child protection has been activated.
The TV cannot be operated.
î
An incorrect remote control code was selected.
î
No time. Set the time in the Others [Clock] Setup menu.
The display light is weak.
î
Change the [FL Display] setting in the Display Setup menu.
"0:00" blinks on the unit display.
î
The PROGRESSIVE output is activated, but the connected TV is not
progressive-capable.
Page
57
REMOTE CONTROL
