AV2 Connection
[Video] [S Video]
[Decoder] [Ext]
[Ext Link 1] [Ext Link 2]
TV Aspect
[16:9] [4:3] [Letterbox]
Progressive
[On] [Off]
TV System
[PAL] [NTSC]
AV1 Output
[Video ( with component )]
[RGB 1 ( without component )]
[RGB 2 ( without component )]
AV2 Settings
AV2 Input
AV2 Input
Ext Link
AV2 Connection
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
AV2 Input
Video
AV2 Settings
AV2 Connection
Ext
SELECT
RETURN
ENTER
VHS
AV2 Input
Video
S Video
Ext Link
Ext Link 2
SELECT
RETURN
ENTER
Connection
Setting
ENTER
ENTER
Option
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
TVAspect
TV System
4:3
Off
PAL
AV1 Output
Video
AV2 Settings
VHS
TAB
SELECT
RETURN
ENTER
Progressive
FUNCTIONS
DVD VHS
Setup
FUNCTIONS
To Others
Decoder
Ext
:
: When a satellite receiver is connected etc.
When a decoder is connected.
Select the TV screen format of your television. Programmes in 16:9 format are recorded
in 4:3 format. 16:9 format is used to record to RAM.
: Black bars appear on the upper and lower edges of the screen.Letterbox
On: The signal is displayed in full-picture quality using COMPONENT VIDEO OUT.
PAL
NTSC
: You connect the unit to a PAL- or multi-system television. Programmes that were
recorded with NTSC are played as PAL60.
: You connect the unit to an NTSC television. Programmes that were recorded
with NTSC are played as NTSC.
Perform the settings in the
following submenus for the
connected unit.
Video, S Video: The input is switched to the selected signal.
Ext Link 1
Ext Link 2
: For digital receivers that send a special recording control signal, for
example, the F.U.N. receiver (TU-DSF41)
: External recording control for satellite or digital receivers (video signal).
Ext Link
RGB 1 : RGB output is available all the time while this unit is on.( without component )
RGB 2 : RGB output is available only during or on-screen display.
If RGB 1 or 2 is set, there is no signal available on COMPONENT VIDEO OUT.
( without component )
Video ( with component ): Factory-default settings
AV-Link function
Switching between television reception and
the signal from the DVD Recorder. This
function is only possible if the AV1 Output is
set to [Video ( with component )] or
[RGB 2 ( without component )].
Television reception: Press the buttons again.
TV appears on the display.
DVD recorder signal: Press + .
DVD appears on the display.
ENTER 0
50
