Filter
Top Products
14
RQT9306
Watching analogue and digital broadcasts
Basic operations
This DVD recorder has a tuner which allows it to
directly receive and record analogue and digital
terrestrial channels.
1 Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2 Press [Í] to turn the unit on.
3 Press [WXCH] to select the channel.
Everytime you change the station, digital channel information
appears automatically (terrestrial digital channels only).
Channels are displayed in the order of digital channels first,
and then followed by analogue channels.
≥Digital channel
You can also select the channel with the numbered buttons.
≥Analogue channel
You can also select the channel with the following steps.
[Note] (Digital broadcast only)
≥This unit can receive Standard Definition (SD) broadcasts, but is
unable to receive High Definition (HD) broadcasts.
When High Definition (HD) programmes are broadcast, “Unable to
decode HD” is displayed in the digital channel information
(> right).
≥This unit can receive free cable television but it cannot receive paid
services.
While stopped
Press [STATUS ] to show the information
screen.
To switch information of the current programme and the next
programme
Press [2, 1].
To show detailed information about the programme
Press [STATUS ]
again (only when “info ” is displayed).
To hide the information screen
Press [STATUS ] once or twice.
Signal Quality
You can also select the other channel when the information screen is
displayed by pressing [3, 4] and [OK].
∫ If New Channel Message appears
When a DVB channel is added, this unit will be informed
automatically. Then the confirmation message appears. If you
select “Yes” on the display, Auto-Setup starts (all channel settings
are deleted. The timer recording programmes are also
cancelled.)
The display/hide setting can be changed (> 62, New Channel
Message).
Select the channel
e.g., 5: [0] > [0] > [5]
15: [0] > [1] > [5]
115: [1] > [1] > [5]
1 Press [ANALOGUE CH].
2 Press the numbered buttons to select the channel.
e.g., 5: [0] > [5]
15: [1] > [5]
STAT US
REC MODE
REC
MANUAL SKIP
CREATE
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
G
U
I
D
E
RETURN
PLAY/x1.3
PAU SE
STOP
SLOW/SEARCH
SKIP
CH
PAG E
SELECT
INPUT
0
9
8
7
6
54
3
2
1
AV
TV
DRIVE
SELECT
DELETE
EXIT
OK
OPTION
ANALOGUE
CH
G-Code
AUDIO
DISPLAY
TIME SLIP
PROG/CHECK
CH
VOL
CH
ANALOGUE
CH
STATUS
,,,
OK
OPEN
/
CLOSE
REC
CH
Numbered
buttons
RECREC
RECREC
Digital channel information
No Signal: The digital broadcast signal is not being received.
No Service: No broadcasts are currently available.
If “No Signal” is displayed:
≥Adjust the position and direction of the aerial.
≥Check that the current digital broadcast channel is correctly
broadcasting.
352 ABC2
No Signal
All Channels
18:53
Change Favourite
info
ABC News
19:00 - 19:30
NOW
Multi Audio PG
Encrypted
During scrambled broadcasting
(Cannot be viewed with this unit.)
Programme is broadcast in multi-
channel sound (> 55, DVB Multi Audio)
Category
Channel
Programme
name
Change the
category
(> 59).
Signal Quality (> below)
Progress of the current
programme
Station Name
The parental ratings level is displayed.
Broadcast
time
Current time
Note
A new DVB Channel has been found.
Start DVB Auto-Setup?
Selecting DVB Auto-Setup will delete
all Timer Programmes.
New Channel
No Yes
OK
RETURN
DMREX79GN-RQT9306-L_eng.book 14 ページ ２００９年３月２４日 火曜日 午後２時３８分