Filter
Top Products
78
RQT9306
Troubleshooting guide
Tracks could not be copied to the HDD.
¾ If there are copyright protected tracks such as SCMS
restrictions, they will not be copied.
¾ Recording from CDs that do not conform to CD-DA
specifications (copy control CDs, etc.) cannot be guaranteed.
¾ Bonus tracks may not be copied.
ID3 tag of a MP3 file or WMA tag of a WMA file is
not completely displayed.
¾ Only the track name ([HDD] [USB]) and artist name ([HDD]) can
be displayed with this unit.
Cannot display DIRECT NAVIGATOR screen.
¾ This screen cannot be displayed during recording or copying.
Still pictures (JPEG) do not playback normally.
¾ The images that were edited on the PC, such as Progressive
JPEG etc., may not playback. (> 12)
The contents of the USB memory cannot be read.
¾ Remove the USB memory from the USB port and then insert
again. If this does not solve the problem, turn off and turn on the
unit again.
¾ Check that the USB memory is inserted correctly. (> 13)
¾ The format of the USB memory or of its contents is not
compatible with the unit. (The contents on the USB memory
may be damaged.) (> 11, 12)
¾ The USB memory contains a folder structure and/or file
extensions that are not compatible with this unit. (> 12)
¾ Turn off and then turn on the unit again.
¾ USB memories connected using a USB extension cable or a
USB hub may not be recognized by this unit.
¾ Some USB memories cannot be used with this unit. (> 11)
¾ If inserted during playback, recording or copying etc., the USB
memory may not be recognized by this unit.
The TV Guide System does not receive any data.
¾ Check whether the clock is properly set. (> 64)
¾ If signal quality is bad (ghost images or limited reception), the
TV Guide system may not be able to receive any data.
“No Data” is displayed for some or all stations.
¾ Some stations are not supported by the TV Guide system.
¾ Analogue broadcasts are not supported by the TV Guide
system.
¾ Programme the Timer recording manually or via G-
CODE.
(> 23)
The TV Guide information is not displayed
properly.
¾ There was a programme change.
Check the current programme, e.g. on the Web site for the TV
Guide system provider or station provider.
¾ Programme information about analogue broadcasts is not
displayed.
The TV Guide data transfer was interrupted.
¾ The TV Guide system shows the data that was received up to
the interruption.
¾ The programme information may be incomplete.
The TV Guide data is not updated.
¾ Make sure that the time is set correctly.
¾ Check whether “Off” is set under “TV Guide Download in
Standby” and change the setting in the Setup menu. (> 64)
Music
Still pictures
USB
TV Guide
DMREX79GN-RQT9306-L_eng.book 78 ページ ２００９年３月２４日 火曜日 午後２時３８分