Filter
Top Products
54
RQT9306
Using on-screen menus/Status message
Setting menus
1 Press [DISPLAY].
≥Depending on the condition of the unit (playing, stopped,
etc.) and disc contents, there are some items that you
cannot select or change.
2 Press [3, 4] to select the menu and
press [1].
3 Press [3, 4] to select the item and
press [1].
4 Press [3, 4] to select the setting.
≥Some items can be changed by pressing [OK].
To clear the on-screen menus
Press [DISPLAY].
§
With some discs, you may only be able to make changes using
the menus (> 15) on the disc.
≥The display changes according to the disc content. You cannot
change when there is no recording.
Audio attribute
Language
This function works only when the elapsed play time is displayed.
Select the item for repeat play. Depending on the disc, the items that
can be selected will differ.
§
Only when you have set “Progressive” to “On” in the Setup menu
(> 63).
Using on-screen menus
Common procedures
Disc menu—Setting the disc content
Soundtrack
§
[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
The disc’s audio attributes appear.
[DVD-V]
Select the audio and language (> right, Audio attribute,
Language).
DivX
Select the soundtrack number.
≥Soundtrack numbers are displayed even when there is only one
audio type.
Subtitle
§
[DVD-V]
Turn the subtitle on/off and select the language (> right,
Language).
[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] (Only
discs that contain subtitle on/off information)
Turn the subtitle on/off.
≥Subtitle on/off information cannot be recorded using this unit.
DivX
Turn the subtitle on/off and select “Text” or the subtitle number.
≥“Text” or subtitle numbers are displayed even if there are not
multiple subtitles.
Angle
§
[DVD-V]
Change the number to select an angle.
Audio channel [HDD] [RAM] [-RW‹VR›] [VCD] and DivX
(> 28, Changing audio during play)
Source Select (DivX)
≥Automatic:
The constructing method of the DivX contents is
automatically distinguished and output.
≥Interlace:
Select when the disc contents were recorded using interlace.
≥Progressive:
Select when the disc contents were recorded using
progressive.
PBC (Playback control > 81) [VCD]
Indicates whether menu play (playback control) is on or off.
Disc
Play
Picture
Sound
Soundtrack
Subtitle
1
Audio channel
Off
L R
Digital 2/0 ch
Other
Menu Item Setting
Signal type
k (kHz):
b (bit):
ch (channel):
Sampling frequency
Number of bits
Number of channels
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:
SVE:
NOR:
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
DAN:
POR:
RUS:
JPN:
CHI:
KOR:
MAL:
VIE:
Danish
Portuguese
Russian
Japanese
Chinese
Korean
Malay
Vietnamese
THA:
POL:
CES:
SLK:
HUN:
FIN:
¢:
Thai
Polish
Czech
Slovak
Hungarian
Finnish
Others
Play menu—Change the play sequence
Repeat Play
≥All
≥Chapter
≥Group
≥PL (Playlist)
≥Title
≥Track
[CD] [VCD]
[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW] [DVD-V] [-RW‹VR›]
MP3/WMA (except [USB])
[HDD] [RAM] [-RW‹VR›]
[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW] [DVD-V] [-RW‹VR›]
[CD] [VCD] and MP3/WMA (except [USB])
Select “Off” to cancel.
Picture menu—Change the picture quality
Playback NR
Reduces noise and picture degradation.
Progressive
§
(> 81)
Select “On” to enable progressive output.
Select “Off” if the picture is stretched horizontally.
Transfer
§
[When “Progressive” (> above) is set to “On”.]
Select the method of conversion for progressive output to suit
the type of title being played (> 81, Film and video).
When the output signal is PAL
(When the tray is opened, the setting will return to “Auto”.)
≥Auto:
≥Video:
≥Film:
Automatically detects the film and video
content, and appropriately converts it.
Select when using “Auto”, and the content is
distorted.
Select this if the edges of the
film content appear jagged or
rough when “Auto” is selected.
However, if the video content
is distorted as shown in the
illustration to the right, then
select “Auto”.
When the output signal is NTSC
≥Auto 1
(normal):
≥Auto 2:
≥Video:
Automatically detects the film and video
content, and appropriately converts it.
In addition to “Auto 1”, automatically detects
film contents with different frame rates and
appropriately converts it.
Select when using “Auto 1” and “Auto 2”, and
the content is distorted.
Input NR
Reduces the noise while recording (Except analogue
channels).
≥Automatic:
Noise reduction only works on picture input from a video
tape.
≥On:
Noise reduction works for input video.
≥Off:
Noise reduction is off. You can record the input signal as it is.
LPCM/ Digital/DTS/MPEG:
DMREX79GN-RQT9306-L_eng.book 54 ページ ２００９年３月２４日 火曜日 午後２時３８分