Panasonic DMR-EX79 DVD Recorder User Manual


 
63
RQT9306
Setting menus
(All factory default settings are indicated with underlined text.)
Depending on the connected equipment, some items may be
shaded in grey on the display and cannot be selected, or you may
not be able to change the settings.
Connection
TV Aspect
Set to match the type of television connected.
[16:9
] When connected to a 16:9 widescreen television.
[Pan & Scan]
When connected to a 4:3 aspect
television, side picture is trimmed
for 16:9 picture.
[Letterbox]
When connected to a 4:3 aspect
television. 16:9 picture is shown in
the letterbox style.
Progressive
You can enjoy progressive video by connecting this unit’s
COMPONENT VIDEO OUT terminals to an LCD/plasma television
or LCD projector compatible with progressive scan.
This setting is fixed with “Off” if you set “AV1 Output” to “RGB 1
( without component )” or “RGB 2 ( without component )”.
[On] [Off
]
When connected to a regular television (CRT: Cathode ray tube)
or a multi system television using PAL mode, even if it is
progressive compatible, progressive output can cause some
flickering. Turn off “Progressive” if you are concerned about it
(> 54).
Picture will not be displayed correctly if connected to an
incompatible television.
TV System
Change the setting to match the equipment you are connecting
with, or to match the title when there are both PAL and NTSC titles
on the HDD.
[PAL
] Select when connecting to a PAL or Multi-system
television. Titles recorded using NTSC are played as
PAL 60.
Select to record television programmes and PAL input
from other equipment.
[HDD] Select when playing a PAL input title recorded on
the HDD.
[NTSC] Select when connecting to a NTSC television.
Television programmes cannot be recorded properly.
Select to record NTSC input from other equipment.
[HDD] Select when playing a NTSC input title recorded
on the HDD.
This unit cannot record NTSC signals to discs that already have
PAL signal recordings. (However, both types of programmes can
be recorded onto the HDD.)
If “NTSC” has been selected, the TV Guide system cannot be
used.
A title recorded on the HDD with different TV system cannot be
played with the setting as is. A disc with different TV system may
not be also played with the setting as is, only when recording or
on standby for the timer recording.
In those cases, you will be able to playback by changing the “TV
System” settings. But to prevent the failure of the timer recording,
change back the settings before the recording starts.
To change the setting all at once (PAL!#NTSC)
While stopped, keep pressing [] and [< OPEN/CLOSE] on the
main unit at the same time for 5 or more seconds.
Note
Note
HDMI Settings
Press [OK] to show the following settings.
HDMI Video Format
You can only select items compatible with the connected
equipment. This setting normally does not need to be changed.
However if you are concerned about output picture quality, it may
be improved by changing the setting.
To enjoy High Quality Video up-converted to 1080p, you need
to connect the unit directly to 1080p compatible HDTV. If this
unit is connected to an HDTV through other equipment, it must
also be 1080p compatible.
[576i/480i] [576p/480p] [720p] [1080i]
[1080p] When setting video output to “1080p”, we
recommend using High Speed HDMI Cables that
have the HDMI logo (as shown on the cover) and
are less than 5 meters to prevent video distortion
etc.
[Automatic
] Automatically selects the output resolution best
suited to the connected television (1080p, 1080i,
720p, 576p/480p or 576i/480i).
Aspect for 4:3 Video
To play a 4:3 title when connected with an HDMI cable, set how
to show pictures on a 16:9 widescreen television.
[4:3
]
Picture output expands left or right.
[16:9]
Picture is output as original aspect with
side panels.
Digital Audio Output
[HDMI and Optical]
[Optical Only] Select when this unit is connected to an
amplifier with an optical digital audio
cable and connected to a TV with an
HDMI cable and you want to enjoy the
highest quality of audio from discs
(> 67).
VIERA Link
Set to use “HDAVI Control” function when connected with an
HDMI cable to a device that supports “HDAVI Control”.
[On
]
[Off] Select when you do not want to use “HDAVI Control”.
AV1 Output
Set according to the terminal of the connected TV.
Select “Video ( with component )” or “S Video ( with component )”
for component output (progressive output).
If this unit is connected with an HDMI cable, you cannot select
“RGB 1 ( without component )” or “RGB 2 ( without component )”.
[Video ( with component )
]
Select when a TV is connected that can receive a composite signal.
[S Video ( with component )]
Select when a TV is connected that can receive an S Video
signal.
[RGB 1 ( without component )]
Select when a TV is connected that can receive an RGB signal. If
you always would like to view the picture from the unit in RGB
signal, select this mode. The TV screen will automatically switch
to display the picture from the unit when the unit is turned on.
[RGB 2 ( without component )]
Select when a TV is connected that can receive an RGB signal. If
you would like to switch to display the picture from the unit only
when playback or viewing menus, select this mode.
AV2 Input
Set according to the output signal of the connected equipment.
[Video]
[S Video]
DMREX79GN-RQT9306-L_eng.book 63 ページ 2009年3月24日 火曜日 午後2時38分