Filter
Top Products
24
RQT9306
Advanced timer recording
1 While the unit is on
Press [∫].
2 Press [2, 1] to select “Stop
Recording” and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a daily or weekly timer recording, the recording
will start from the next time the timer recording is set.
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme
and press the “Red” button.
≥The timer icon “F” (> 25) disappears from the timer
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon “F” (> 25) remains in the timer
recording list.
≥Press the “Red” button again to activate timer recording
standby.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the “HDD”. If
there is no disc in the tray or the disc cannot be recorded on or when
timer recording starts while copying, the recording drive will be
altered to the HDD.
≥The DIRECT NAVIGATOR shows which programmes were relief-
recorded (“ ” is displayed.) (> 29).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when daily or weekly timer
recording is selected.
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme
and press [OK].
3 Press [2, 1] to select “RENEW”
column.
4 Press [3, 4] to select “ON” and press
[OK].
≥If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥Playlists made from programmes that were set for Auto Renewal
Recording are deleted along with auto renewal.
≥When there is not enough space on the HDD, the programme may
not be recorded completely.
To cancel recording when recording
has already begun
To release the unit from recording
standby
Stop Recording
Stop Recording
Cancel
Timer recording in progress.
Stop this timer recording ?
It will be cancelled if you stop.
OK
RETURN
SELECT
Relief Recording
Auto Renewal Recording
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
Mode
StopStartChannel Date
HDD
DVD
22:3022:00SUN HDD
1 ARD
Programme Name
SP
RENEW
ON
All Channels : ARD
TUE 14.10.09. 12:53:00
Note
DMREX79GN-RQT9306-L_eng.book 24 ページ ２００９年３月２４日 火曜日 午後２時３８分