22
VQT2J51
Recording Television Programmes
Refer to “Notes for Recording” (> 27) and “Advanced Recording” (> 28–
30) for detail information on recording.
[RAM] [-R] [-R ]DL] [-R W‹V›] [+R] [+R]DL] [+RW ] [VHS]
Preparation:
≥ Turn on the television and select the appropriate video input to suit the
connections to this unit.
≥ [R AM] If the disc is protected, release protection (> 64).
≥ [VHS] Ensure accidental erasure tab is intact.
1
to turn the unit on.
2
to select the drive (DVD or VHS).
3
Insert a disc or video cassette.
– Insert a disc or video cassette with enough remaining blank
space (> 7).
– When the format confirmation screen is displayed (> 29).
4
to select desired channel.
– To select with the numbered buttons (> 19).
– When no channel setting is performed on the unit and broadcast
is recorded directly from the digital satellite receiver, select a
channel on the connected equipment, then press
[INPUT SELECT] to select “AV2”.
5
to select the
recording mode. (> 28)
6
to start recording.
Pausing Recording
Press [;].
– Press again to restart recording.
(The title is not divided.)
Stopping Recording
Press [∫].
Tips
≥If a programme to record has subtitles, Audio Description or multiple audio, you can record
with these items. They cannot be switched after recording.
– To record with subtitles
Before starting the recording, show the subtitles (> 48). If the programme has multiple
subtitle, select the desired language (> 67).
– To record with Audio Description
Before starting the recording, turn on the Audio Description and set the volume (> 48).
– To record with the selected audio
Before starting the recording, select the desired audio channel or language, if the
programme has multiple audio channel or language (> 63, 67).
≥(Except for [VHS] )To record sound using LPCM (XP mode only):
Set the “Audio Mode for XP Recording” to “LPCM” in the Setup menu (> 69)
TV
TIME SLIP
STTL DISPLAY
DIRECT TV REC
EXT LINK
REC MODE
REC
-10s
MANUAL SKIP
+60s
STOP
PAUSE
PLAY
INPUT
SELECT
0
9
8
7
6
54
3
2
1
CH
CH
TRACKING/V-LOCK/PAGE
CHAPTER
PROG/CHECK
SKIP/INDEX REW
JET REW
FF
SLOW/SEARCHRESET
VOL
AV
DRIVE
SELECT
STATUS
EXIT
OPTION
RETURN
DELETE
OK
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
F
U
N
C
T
I
O
N
M
E
N
U
G
U
I
D
E
TEXT
Notes
≥[RAM] [-RW‹V›] [+R] [+R]DL] [+RW] To use
a new disc, formatting is necessary.
(> 29, 64)
≥[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
It takes about 30 seconds for the unit
to complete recording management
information after recording finishes.
≥You cannot change the channel or
recording mode during recording.
≥This unit cannot record NTSC signals
to discs that already have PAL signal
recordings.
≥Depending on the type of disc used for
recording or the type of broadcast,
there may be restrictions on the title
you are trying to record. (> 27)
≥[VHS]
– Even if the video cassette is labelled
“S-VHS”, it is not possible to record
in the S-VHS system with this unit.
This unit records in the normal VHS
system.
– When recording is paused for
5 minutes or more, the unit returns
to stop.
DRIVE
SELECT
CH
RECREC
XP
0:16
SP
0:32
LP
1:05
EP
2:11
Recording Mode
Rec Mode Remain
SELECT
e.g.,
REC MODE
REC
REC
Elapsed recording time
DMR-EZ49VEB_VQT2J51.book 22 ページ 2009年12月21日 月曜日 午後5時40分