Filter
Top Products
VQT2J51
81
On the Unit’s Display (Continued)
F74 ≥ The HDMI connection could not be authenticated due to a transfer malfunction.
If you have another HDMI cable, try to use it. If it remains displayed, consult the
dealer where the unit was purchased.
F75 ≥ The HDMI connection could not be authenticated due to an internal data
malfunction. If you have another HDMI cable, try to use it. If it remains
displayed, consult the dealer where the unit was purchased.
U59 ≥ The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until
the message disappears.
Select a position with good ventilation when installing the unit. Do not block the
cooling fan on the rear of the unit.
U61 ≥ (When a disc is not inserted) Displays when a malfunction has occurred. This is
displayed when the unit is in the recovery process to return to normal operation.
Once the display disappears you can use the unit again.
If it remains displayed, consult the dealer where the unit was purchased.
U76 ≥ HDMI cannot be output because this unit is connected to a model that does not
support copyright protection.
U80, U81, U99 ≥ The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit
to standby mode. Press [Í/I] on the main unit again to turn the unit on.
U88 ≥
There was something unusual detected with the disc while recording, playing or
copying; there was a power failure or the AC mains lead was disconnected while
the unit was on. The unit is carrying out its recovery process. This process restores
the unit to normal operation. Wait until the message disappears.
If it remains displayed, consult the dealer where the unit was purchased.
X HOLD ≥ The Child Lock function is activated.
Press and hold [OK] and [RETURN ] at the same time until “X HOLD”
disappears. (> 74)
On the TV
Cannot finish recording completely.
Copy-protect signal was detected.
≥ The programme was copy-protected.
Disc is full, or maximum number of titles
are recorded.
Cannot finish recording completely.
≥ The disc may be full.
≥ The maximum number of title has been exceeded. (> 28)
≥ [RAM] [- RW‹V›] [+RW] Create space by erasing unwanted titles.
Even if you erase recorded content from the DVD-R, DVD-R DL, +R or +R DL
there is no increase in disc space. Available recording space on a DVD-RW
(DVD-Video format) or +RW disc increases when the last title is deleted (space
may increase slightly when you delete other titles). (> 26, 50, 64)
≥ Use a new disc.
Cannot record.
Maximum number of titles exceeded.
No cassette. ≥ There is no video cassette in the tape deck when playing or recording TV
programmes. Insert a video cassette. (> 7)
The cassette is write-protected. ≥ A video cassette without a secure accidental erasure prevention tab is inserted
when recording programmes. Use a video cassette with a secure accidental
erasure prevention tab. (> 7)
Cannot playback.
TV system is different from the setting.
To playback, please change the TV System
in Setup.
≥ You tried to play a title recorded using a different encoding system from that of
the TV system currently selected on the unit.
Alter the “TV System” setting on this unit to suit. (> 70)
Cannot play on this unit. ≥ You tried to play a non-compatible image. (> 18)
No Disc ≥
The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
≥ Ensure the disc is flat in the tray.
Now recording on DVD.
To watch pictures on VHS, use AV1 socket,
and switch to an appropriate AV channel
on your TV.
≥ The VHS plays back while recording on DVD. You can watch the VHS playback
by connecting 21-pin Scart cable from AV1 on the unit to the television.
VHS cannot be output via “DVD priority out” while recording to DVD. (> 75)
This is a non-recordable disc. ≥ The disc may be dirty or scratched. (> 7)
≥ The unit cannot record on the disc you inserted. Insert a DVD-RAM or
unfinalised DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, R DL or
+RW disc. (> 15)
≥ You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW disc.
Format the disc with the unit. (> 64)
Unable to format.
This disc is not formatted properly.
Format it using DVD Management
in FUNCTION MENU.
$ ≥ The operation is prohibited by the unit, disc or video cassette.
DMR-EZ49VEB_VQT2J51.book 81 ページ ２００９年１２月２１日 月曜日 午後５時４０分