Filter
Top Products
VQT2J51
9
STEP 1
The Unit’s Display
1 Timer recording indicator.......................... (> 23)
On:
When a timer recording programme is registered and a
recordable disc or video cassette is inserted.
Flashes:
When the unit cannot record a timer recording programme
(e.g., there is no disc or video cassette, etc.).
2 Recording mode indicator......................... (> 28)
3 Main display section
Current time/playback counter, various messages
4 Copying indicator
5 Digital broadcast indicator
Lights when the unit is receiving digital broadcast.
6 Linked timer recordings with external equipment
indicator..................................................... (> 31)
7 Tape indicator
8 Recording/Playback indicator
9 Remote control visual feedback
This flashes when it is operated by the remote control.
: Disc indicator
This indicator lights up when a disc is inserted.
Main Unit
1 Cassette eject button
2 Disc tray open/close button ...................... (> 20)
3 Start recording button ............................... (> 22)
4 Stop button ......................................... (> 20, 22)
5 Play button................................................ (> 20)
6
Standby/on switch (Í/I)..................... (> 13)
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
7 AV3 input terminals ................................... (> 32)
8 DVD/VHS drive indicator........................... (> 20)
≥Lights when the DVD or VHS drive is selected.
≥There is no drive indicator for HDD or SD drive.
9 DRIVE SELECT button ................. (> 20, 21, 22)
≥Drive changes each time you press [DRIVE SELECT].
: Channel Select button........................ (> 19, 22)
; USB port..................................................... (> 7)
< One Touch Copying operation button
≥From VHS to DVD ......................................... (> 24)
≥From DVD to VHS.......................................... (> 25)
Rear Panel
1 AC IN~ = Power supply ............................ (> 11)
Connection for the AC mains lead
2 Serial number
3 Cooling fan
4 HDMI AV OUT terminal....................... (> 12, 77)
Digital audio and video output terminal
5 Digital audio output terminal...................... (> 76)
6 AUDIO/VIDEO output terminals ............... (> 76)
7 AV2 (EXT) 21-pin Scart terminal ......... (> 11, 75)
Connection of an external unit
8 AV1 (TV) 21-pin Scart terminal..... (> 10, 11, 75)
TV set connection
9 Aerial output terminal.................... (> 10, 11, 75)
: Aerial input terminal...................... (> 10, 11, 75)
S VIDEO
VIDEO
/MONO
RL
S VIDEO
VIDEO
DRIVE SELECT
REC
CH
OPEN/CLOSE
EJECT
COPYING
COPYING
COPYING
VHS
DVD
COPYING
VHS
DVD
VHS
AUDIO
L/MONO R
AV3 IN
DVD
Opening the front panel
Press down on the
part with your finger.
The unit‘s display
Remote Control
signal sensor (> 6)
Cassette
compartment Disc Tray
AC IN
RF
IN
RF
OUT
OPTICAL
(PCM/BITSTREAM)
OUT
VIDEO
AV2 (EXT) AV1 (TV)
R-AUDIO-
L
DMR-EZ49V
Model No.
DIGITAL AUDIO OUT
VR7AA01002 R
SER NO.
DMR-EZ49VEB_VQT2J51.book 9 ページ ２００９年１２月２１日 月曜日 午後５時４０分