Filter
Top Products
VQT2J51
35
[RAM] [-R] [-R]DL] [-RW‹V›] [+ R] [+ R]DL] [+RW]
To make a timer recording with your television, connect to
a television with a Q Link function (> 46) that you can
use for setting timer recordings using a fully wired 21-pin
Scart cable (> 10,11).
Tips
To stop recording
Press [∫].
Notes
≥When this unit is in EXT LINK standby (“EXT-L” on the unit’s display
lights), recording from TV does not start.
≥Programmes are recorded as one title on this unit when the end time
of the earlier timer recording and the start time of the later timer
recording are close to each other.
[RAM] To divide the titles, go to “Divide Title” (> 51).
≥When a timer recording is set, DVDs that were recorded using a
different TV system (PAL/NTSC) cannot be played unless the TV
system is changed in the Setup menu (> 70) or the timer recording
has completed or has been cancelled.
≥Timer recordings are activated regardless of whether the unit is turned
on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying.
≥If the unit is turned on when timer recording begins, it remains turned
on after recording finishes. It does not turn off automatically. You can
turn the unit off during timer recording.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at the
beginning of the later programmes.
≥
The “Overlapped Timer Recording” screen may be displayed immediately
after you turn on this unit, if new overlapping occurred. Refer to “Check,
Change, Delete Programmes, or Resolve Overlapping” (
>
34).
Making timer recordings on the television
1
Make timer programming on the TV.
2
to turn the unit off.
– The start and end of recording is controlled by TV.
Notes on timer recording
Not recorded
Programme
Recorded Recorded
Programme
VQT2J51-Body1.fm 35 ページ ２００９年１２月２２日 火曜日 午後８時１４分