Filter
Top Products
76
VQT2J51
Additional Connections
≥ You can connect this unit to a TV using the audio/video
(AV) cable, instead of the HDMI cable or 21-pin Scart
cable (> 10, 11, 75).
≥ Using a Scart or HDMI cable gives a higher quality
picture than this connection.
≥ Connect to terminals of the same colour.
You can improve sound quality by connecting this unit to
an amplifier or system component using the audio cable
or the optical digital audio cable.
It is possible to output 2-channel stereo sound.
≥ Connect to terminals of the same colour.
It is possible to output multi-channel surround sound on
DVD-Video.
≥ Connect an amplifier or system component with a built-
in Dolby Digital, DTS or MPEG decoder.
≥ Adjust settings in “Digital Audio Output” (> 69) as
needed, depending on other connection and the
amplifier or receiver.
Connecting to a Television with Audio/
Video Cable (not included)
AUDIO IN
VIDEO
IN
RL
AUDIO
VIDEO
L
R
TV
This unit
OUT
Adding an Amplifer or Receiver
Using an Audio Cable (not included)
Using an Optical Digital Audio Cable (not included)
Notes
≥When this unit is connected to an amplifier with an optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
“Digital Audio Output” to “Optical Only” in the Setup menu (> 70).
In this case audio is only output from the amplifier not the television.
≥You cannot use DTS Digital Surround decoders not meant for DVD.
≥Before purchasing an optical digital audio cable, check the terminal
shape of the equipment to be connected.
AUDIO IN
RL
This unit
Amplifier
or
System Component
AUDIO
L
R
OUT
This unit
Amplifier or System Component
OPTICAL
OPTICAL IN
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Insert fully with this side up.
Do not bend cable sharply.
DMR-EZ49VEB_VQT2J51.book 76 ページ ２００９年１２月２１日 月曜日 午後５時４０分