Filter
Top Products
VQT2J51
27
Notes for Recording
Advanc
ed
Featur
es
≥It is not possible to record to DVD or VHS drive while recording to the other drive.
Selecting
audio for
recording
Broadcast in multi-channel sound:
You can select audio language when received audio in multi-
channel broadcast (“Multi Audio” appears at the bottom of digital
channel information display).
However, audio cannot be switched after recording.
About the
aspect when
recording a
programme
[RAM] [-R] [-R]DL] [-RW‹V›] [VHS]
The original aspect used for the source programme will also be
used with the recording.
However, in the following case, programme will be recorded in
4:3.
[-R] [-R]DL] [-RW‹V›]
Programme recorded using “EP” or “FR (recordings 5 hours or
longer)” recording modes will be recorded in 4:3 aspect.
[+R] [+R]DL] [+RW]
The programme will be recorded in 4:3 aspect.
Copy-once
recording
≥It is not possible to record the broadcasts that allow “One time only recording” onto DVD-R, DVD-R DL, DVD-RW,
+R, +R DL, +RW or 8 cm DVD-RAM discs. Use the CPRM (> 92) compatible DVD-RAM.
≥Even when copying to video tape the title may not be copied correctly because of the copy guard.
≥You cannot copy a playlist created from “One time only recording” titles.
Playing the
disc on other
DVD players
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
The disc must be finalised after recording or copying (> 65).
It is necessary to finalise DVD-R, etc. on this unit after recording or copying titles to them. You can then play them in
the same way as a commercially sold DVD-Video. However, the discs become play-only and you can no longer record
or copy.
§
§
You can record and copy again if you format DVD-RW.
[+RW]
If the disc failed to play on other equipment, we recommend you create top menu (> 65). However, even with Top
Menu, +RW may not play on other players.
Recording to
DVD-R DL
and +R DL
DVD-R DL and +R DL discs have two layers of recording surface on one side.
≥It is not possible to record continuously from the first layer to the second layer. Recording stops when space
on the first layer becomes full. You must close the first layer to start recording on the second layer (> 65).
Closing makes the first layer unavailable for recording (editing is still available). You cannot cancel closing. Make
certain before proceeding.
Hello Hola
Hallo
Select the audio that you
want to record in “DVB Multi
Audio” in the on-screen
display (> 63).
–—
–—
[RAM] CPRM compatible discs only. [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
12 cm
(≤: Can do, –: Cannot do)
CHG
S
EARCH
E
NTER
OFF
MENU
R
E
T
URN
T OP M
EN
U
D
I
S
PL A
Y
V
O
L
ON
A.
S
UR
R OU
N
D
MONI
T
OR MOD
E
P
I
CTURE MODE
REP
E
A
T
OPEN
D
C
I
N
9
V
/I
CD SEQUENTIAL
DISC
DOUBLE RE-MASTER
/ /
DISC EXCHANGE DISC SKIP
OPEN / CLOSE
1
2 3 4 5
Finalise
Play on other DVD equipment
Record to DVD-R, etc.
DVD-R DL
+R DL
Second recordable layer
First recordable layer
(Inner section
of the disc)
Title 2Title 1
Recording/Playback direction
(Outer section
of the disc)
The available
space
It is not possible to
record continuously
from the first layer to
the second layer
DMR-EZ49VEB_VQT2J51.book 27 ページ ２００９年１２月２１日 月曜日 午後５時４０分