Filter
Top Products
VQT2J51
65
[-R] [- R]D L ] [- RW ‹V ›] [+R] [+R]D L]
You can play these discs on compatible DVD players by
finalising it on the unit, effectively making it into DVD-Video that
complies with DVD-Video standards. The menu you create with
the unit can also be used on most DVD players.
Perform preparation steps 1–4 of “Accessing the
Management Menus” (> 64).
5 Press [3, 4] to select “Finalise”, then press [OK].
6 Press [2] to select “Yes”, then press [OK].
7 Press [2] to select “Start”, then press [OK].
– Finalising starts and cannot be cancelled (may take up
to 15 minutes) ([ -R] DL] [+R]DL] up to 60 minutes)
– A message appears when finalising is finished.
8 Press [OK] to complete.
[+RW]
+RW discs contain no Top Menu data. Top Menu is a
convenient function. We recommend you create the menu
before playing a +RW disc on other equipment.
Perform preparation steps 1–4 of “Accessing the
Management Menus” (> 64).
5 Press [3, 4] to select “Create Top Menu”, then press
[OK].
6 Press [2] to select “Yes”, then press [OK].
7 Press [2] to select “Start”, then press [OK].
– “Create Top Menu” cannot be cancelled once started.
– “Create Top Menu” takes a few minutes.
8 Press [OK] to complete.
[-R]DL] [+ R]DL]
DVD-R DL and +R DL discs have two layers of recording
surface on one side. As this unit does not offer seamless
recording on two layers, recording stops when space on the first
layer becomes full. You must close the first layer to start
recording on the second layer. Closing makes the first layer
unavailable for recording (editing is still possible).
Perform preparation steps 1–4 of “Accessing the
Management Menus” (> 64).
5 Press [3, 4] to select “Close First Layer”, then press
[OK].
6 Press [2] to select “Yes”, then press [OK].
7 Press [2] to select “Start”, then press [OK].
8 Press
[OK] to complete.
Finalising
Notes
≥ Do not disconnect the AC mains lead while finalising. This
can render the disc unusable.
≥ When finalising a high-speed recording compatible disc, it
may take longer than displayed on the confirmation screen
(approximately 4 times longer).
≥ After finalising
– [-R] [-R]D L] [+R] [+R]DL] The disc becomes play-only and
you can no longer record or edit it.
– [-RW‹V›] You can record and edit the disc after formatting
although it becomes play-only after finalising.
– The disc finalised on the unit may not be playable on
other players depending on the condition of the recording.
– There is a pause of several seconds between titles and
chapters during playback.
– Chapters are created automatically
([-R] [- R]D L ] [- RW ‹V ›] about 5-minute chapters
§
[+R] [+R]DL]
about 8-minute chapters
§
).
§
This time varies greatly depending on the condition and
mode of recording.
Tips
≥ After you have finished recording or copying and try to eject
the disc, a screen asking if you want to finalise the disc
appears (> 29).
Create Top Menu
Notes
≥ Recording or editing on the disc may delete the Top Menu.
In that case, create the Top Menu again.
≥ You cannot use the Top Menu for playing on this unit.
Enabling the Second Layer on DL (Dual- or Double-Layer
on Single Side) Discs to be Recordable
Notes
≥ The first layer cannot be closed when there is no recording
on it.
≥ Closing cannot be cancelled once started.
≥ Do not disconnect the AC mains lead while closing the
layer. This can render the disc unusable.
≥ Closing takes several minutes, up to a maximum of 30
minutes, depending on the remaining space on the first
layer.
Tips
≥ You can confirm the remaining recording time on the layer in
the DVD Management screen.
DVD
Management
DVD-R DL
Titles 1
Used
Remain
of the first layer
0 : 00
3:54(LP)
Top Menu
Disc Name
D l t ll titl
Auto-Play Select
DMR-EZ49VEB_VQT2J51.book 65 ページ ２００９年１２月２１日 月曜日 午後５時４０分