Filter
Top Products
RQT8327
42
Changing the unit’s settings
1 While stopped
Press [SETUP].
2 Press [e,r] to select the tab and
press [q].
3 Press [e,r] to select the menu and
press [ENTER].
4 Press [e,r] to select the option and
press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].
Note
There may be differences in operation methods. If this happens,
follow the on-screen instructions for the operation.
The settings remain intact even if you switch the unit to standby.
*
1
You can set these menus only after “Set Channels Automatically” is completed.
*
2
You can set this menu only after “Set Clock Automatically” is completed.
RETURN
e,r,w,q
ENTER
SETUP
Numbered
buttons
Common procedures
Setup
Channel
Setup
Disc
Video
Adi
Preset Channel Captions
Manual Channel Captions
Channel Captions
Signal Source (RF IN)
Set Channels Automatically
Cable TV
Tabs Menus Options
Summary of settings
Tabs Menus Options (Underlined items are the factory presets.)
Channel Signal Source (RF IN) (Ô page 15) • Antenna • Cable TV
Set Channels Automatically –
Preset Channel Captions*
1
(Ô page 16)
–
Manual Channel Captions*
1
(Ô page 16)
–
Setup Off Timer
Select how long the unit remains on when it is not being used.
• 2 Hours • 6 Hours
•Off
Remote Control Code (Ô page 17) • Set Code 1
• Set Code 2 • Set Code 3
Clock Settings
Press [ENTER] to show the following settings.
Set Clock Automatically –
Set Clock Manually (Ô page 17) –
Adjust Time Zone*
2
(Ô page 17)
•–1 •0
•+1
Quick Start
If you set Quick Start to on, you can start recording to
DVD-RAM about 1 second after you press [^ DVD POWER] to
turn the unit on and then press [* REC].
•On •Off
The following happens when you have selected “On”.
• Power consumption in standby mode increases because power
is supplied to the unit.
Restore Default Settings
This returns all values in the Setup menus, except for the clock,
channel settings, ratings level, and on-screen language, to the
default settings.
•Yes •No