Filter
Top Products
14
Advanced Connections (continued)
Connecting a Cable Box,
Satellite Receiver, and VCR
to the Hard Disk Recorder
1. Connect an A/V cable from the AUDIO/VIDEO
OUT jacks on your cable box to the INPUT jacks
on the Hard Disk Recorder, matching like colors.
2. Connect an A/V cable from the AUDIO/VIDEO
OUT jack on your satellite receiver to the INPUT
jack on the Hard Disk Recorder, matching like
colors.
3. Connect an A/V cable from the OUTPUT jacks
on the Hard Disk Recorder to the AUDIO/VIDEO
IN jacks on your VCR, matching like colors.
4. Connect a second A/V cable from the OUTPUT
jacks on the Hard Disk Recorder to the AUDIO/
VIDEO IN jacks on your television, matching like
colors.
5. Connect an A/V cable from the OUTPUT jacks
on your VCR to the AUDIO/VIDEO IN jacks on
your television, matching like colors.
6. Attach your cable box and satellite receiver
controllers. See “Satellite Receiver and Cable
Box Controllers” on page 10.
7. Follow the C ~ E instructions on page 9 for
telephone connection, AC power connection,
and setup.
NOTES
• If your cable box does not have A/V OUT jacks,
connect an RF cable from the OUT jack to the
ANT/CATV IN jack on the Hard Disk Recorder.
• Refer to your TV, cable box, satellite receiver, or
VCR owner’s manual for more information on
connecting to these components.
AUDIO VIDEORL
VHF/UHF
IN
IN
S-VIDEO
AUDIO
INPUT
OUTPUT
ANT/CATV
VIDEO
S-VIDEO
R L AUDIO VIDEORL
IN
S-VIDEO
OUT
IN
TEL LINE
AC-IN
SERIAL
CONTROL
IR
BLASTER
PORT
AUDIO VIDEORL
IN
OUT
IN
OUT
AUDIO VIDEORL
IN OUT
S-VIDEO
AUDIO VIDEORL
IN
SERIAL
VHF/UHF IN
VHF/UHF OUT
LINE
1
2
TV
Hard Disk Recorder
VCR
Satellite Receiver
Cable Box
OR
PanaHDR P01-.p65 00/11/28, 14:2814