Filter
Top Products
59
Location of Controls
1
Code Set
Used to program the remote control to operate
additional home entertainment components. See
“Setting Up Your Components” on page 42.
Hard Disk Recorder
Puts the remote control in the Hard Disk Recorder
mode, giving you control of the Hard Disk
Recorder features and functions.
TV SAT/CABLE VCR/DVD
Puts the remote control in a particular mode—to
operate your television, satellite receiver, cable
box, VCR, DVD, TV/VCR Combo, or laser disk. If a
component does not respond when you press a
remote control button (or responds incorrectly),
press the appropriate device button (HARD DISK
RECORDER, TV, SAT/CABLE, VCR/DVD) first to
choose which component to operate.
Number buttons
Use the keypad (0-9) to directly select channels
(for example, 09 or 31).
Channel Guide
Displays the Channel Guide, an on-screen guide
of all the channels you receive.
Replay Guide
Displays the Replay Guide, a menu of the shows
the Hard Disk Recorder has recorded for you.
Channel Up/Down
Enable you to select the next higher (or lower)
television channel.
Return to Live
Return to live television after using PAUSE, REW,
FF or STOP.
Select Left Right Up Down
Control navigation (move the yellow highlight bar)
around on-screen menus.
Instant Replay
Skips back 7 seconds in a live or recorded show.
REW PLAY/SLOW FF REC
STOP PAUSE
Used to control the similar functions on your video
components.
Jump
Similar to a “Last Channel” or “Recall” button on a
television remote control, allowing you to quickly
jump back to the channel you were watching
previously.
Input
Press INPUT to switch the input of the chosen
component. If you have more than one component
connected to your television, you may have to
scroll through several inputs to find the one that
corresponds to the component you want to see on
the screen.
2
3
20
21
4
5
6
7
8
9
27 26
10
11
12
14
30
13
34
31
15
16
Display
Activates the on-screen display function for each
of your home entertainment components.
Red LED
Flashes red to indicate that the remote control is
working and sending a signal.
POWER
Turns on or off the currently selected video
component (Hard Disk Recorder, TV, VCR, cable
box, or a re-assigned video component).
Enter
Operates the same way as the Enter button on
your original television remote control. If your
television remote control required you to use an
Enter button to change channels, use the ENTER
button on the Hard Disk Recorder remote control
after entering the appropriate channel number.
Replay Zones
Takes you to the screen where you can create a
Theme-based Replay channel and channels from
topical television categories collected by the
ReplayTV Service.
Volume Up/Down
Raises or lowers the sound volume on your
television.
Mute
Turns television sound on or off.
Select
Use to choose options from a selected
component’s menu or guide.
QuickSkip
Skips forward 30 seconds in a recorded show,
allowing you to jump ahead through unwanted
parts of the show. Also works for a live broadcast if
you have used the STOP, PAUSE, or REW
buttons.
Exit
Exit a selected component’s on-screen menu or
guide.
TV/VCR
This button works the same way as the TV/VCR
button on your original VCR remote control. It also
controls the following functions in other modes:
TV mode = TV/VIDEO; CABLE mode = A/B.
Menu
Press MENU to access the menu of your chosen
component.
17
18
19
22
23
24
25
28
29
32
33
35
PanaHDR- P42-.p65 00/11/28, 14:4859