Filter
Top Products
42 – ENGLISH
2. Press ▲▼◄► to select the SUB
MEMORY number stored in the
“SUB MEMORY LIST”.
3. Press ENTER.
A “Change registered signals” screen will
appear.
4. Press ENTER.
Note
To rename a registered signal, perform steps 4 and
5 on page 41.
Procedure to switch to sub
memory
1. Press ◄► on normal screen
(menu is not displayed).
The screen will show a list of the sub-memory
registered for the currently entered signal.
2. Press ▲▼◄► to select the
sub-memory signal to be
switched in the “SUB MEMORY
LIST”.
3. Press ENTER.
Signal will be switched to the one that was
selected in Step 2.
How to erase sub memory
The currently selected SUB MEMORY is deleted
by pressing DEFAULT at the “REGISTERED
SIGNAL LIST”.
•
•
■
•
•
■
ENTER
REGISTER SUB MEMORY?
NAME
MEMORY NO
INPUT
fH
fV
SYNC.STATE
REGISTER
SXGA60-A1
--
RGB1
64.00kHz
60.00Hz
H(POS)
V(POS)
ENTER
REGISTER SUB MEMORY?
NAME
MEMORY NO
INPUT
fH
fV
SYNC.STATE
REGISTER
SXGA60-A1
--
RGB1
64.00kHz
60.00Hz
H(POS)
V(POS)
On-screen indications
# Input switching / signal switching
This shows the registered signal name on the
status screen for signal switching.
$ Details of registered signal
The designation can be set by the sub memory
items.
MEMORY NO : A1 (1-2)
Note
Restrictions
The maximum sub memory items that can be
registered for the projector are 96 including the
basic signal.
■
•
•
•
INPUT
NAME
MEMORY NO
RGB1
RGB
A1(1-2)
INPUT
NAME
MEMORY NO
RGB1
RGB
A1(1-2)
ENTER
REGISTERED SIGNAL STATUS
NAME
MEMORY NO
INPUT
fH
fV
SYNC.STATE
RENAME
SXGA60-A1
A1(1-2)
RGB1
63.98kHz
60.02Hz
H(POS)
V(POS)
ENTER
REGISTERED SIGNAL STATUS
NAME
MEMORY NO
INPUT
fH
fV
SYNC.STATE
RENAME
SXGA60-A1
A1(1-2)
RGB1
63.98kHz
60.02Hz
H(POS)
V(POS)
Sub memory number
The place in which address code (A1,
A2, ..., H7 and H8) signals are registered
Sub memory number
The place in which address code (A1,
A2, ..., H7 and H8) signals are registered
Registration of input signal data (continued)