Filter
Top Products
ENGLISH – 79
Special Features
Lamp relay
If using the projector for a continuous period of
24 hours or more, this setting can be used to
automatically switch the lamps that are turned on in
order to reduce the lamp deterioration that can occur
as a result of continuous use.
1. Press ▲▼ to select “LAMP
RELAY”.
2. Press ◄► to switch “LAMP
RELAY”.
The time interval for lamps to be switched will
change as shown in the diagram below each
time ◄► is pressed.
OFF
00:00
23:00
01:00
Note
When “SINGLE”, “DUAL” or “TRIPLE” is selected as
the “LAMP SELECT” setting, the lamps will switch
in accordance with the setting time. If “QUAD” is
selected, three lamps will illuminate for 8 hours after
the specified time.
The setting time will be the local time. (p. 81)
•
•
•
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
RS-232C setting
This sets communication parameters for the projector.
1. Press ▲▼ to select “RS-232C”.
2. Press ENTER.
The “RS-232C” screen will be displayed.
3. Press ▲▼ to select “SERIAL
IN”.
4. Press ◄► to switch “SERIAL
IN”.
The setting will change as follows each time
◄► is pressed.
RS-232C RS-422
5. Press
▲▼ to select
communication conditions.
6. Press ◄► to confirm the setting.
7. Press MENU three times.
The on-screen indications disappear, and the
system returns to the normal screen.
•
•
•
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
SUB MENU
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
ENTER
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
SUB MENU
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
ENTER
RS-232C
SERIAL IN
(IN) BAUDRATE
(IN) PARITY
(OUT) BAUDRATE
(OUT) PARITY
VPS SYSTEM
GROUP
MENU SELECT
CHANGE
RS-232C
38400
EVEN
38400
EVEN
MASTER
A
MASTER
RS-232C
SERIAL IN
(IN) BAUDRATE
(IN) PARITY
(OUT) BAUDRATE
(OUT) PARITY
VPS SYSTEM
GROUP
MENU SELECT
CHANGE
RS-232C
38400
EVEN
38400
EVEN
MASTER
A
MASTER