Filter
Top Products
80 – ENGLISH
Option2 settings (continued)
System information
Displays the system information of the projector.
1. Press ▲▼ to select “SYSTEM
INFORMATION”.
2. Press ENTER.
The “SYSTEM INFORMATION” screen will be
displayed.
3. Press ◄► to move to the next
page.
•
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
SUB MENU
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
ENTER
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
SUB MENU
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
ENTER
SYSTEM INFORMATION
ROM VERSION
NETWORK VERSION
SUB VERSION
PROJECTOR RUNTIME
LAMP1 RUNTIME
LAMP2 RUNTIME
LAMP3 RUNTIME
LAMP4 RUNTIME
CHANGE
1.00.00
1.00
1.00
1000h
500h
500h
500h
500h
SYSTEM INFORMATION
ROM VERSION
NETWORK VERSION
SUB VERSION
PROJECTOR RUNTIME
LAMP1 RUNTIME
LAMP2 RUNTIME
LAMP3 RUNTIME
LAMP4 RUNTIME
CHANGE
1.00.00
1.00
1.00
1000h
500h
500h
500h
500h
SYSTEM INFORMATION
ON COUNT
POWER ON TIMES
LAMP 1 ON
LAMP 2 ON
LAMP 3 ON
LAMP 4 ON
SHUTTER
AIR FILTER CLEANING
AUX
NUMBER OF ENTRY SIGNAL
CHANGE
100
50
50
50
50
9( 0)
3( 0)
MD77DV:DN
1/96
SYSTEM INFORMATION
ON COUNT
POWER ON TIMES
LAMP 1 ON
LAMP 2 ON
LAMP 3 ON
LAMP 4 ON
SHUTTER
AIR FILTER CLEANING
AUX
NUMBER OF ENTRY SIGNAL
CHANGE
100
50
50
50
50
9( 0)
3( 0)
MD77DV:DN
1/96
Cleaning the air filter
This can be used to set air filter cleaning.
1. Press ▲▼ to select “AIR FILTER
CLEANING”.
2. Press ENTER.
The “AIR FILTER CLEANING” screen will be
displayed.
You can select the automatic cleaning time
(“TIME”) and also force cleaning to be carried
out immediately (“EXECUTE”).
3. Press ▲▼ to select “TIME”.
Select “TIME” and then set the time for
automatic cleaning to be carried out.
If you would like cleaning to be carried out
straight away, select “EXECUTE” and then
press ENTER.
4. Press ◄► to switch “TIME”.
The setting will change as follows each time
◄► is pressed.
00:00 23:50
(in units of 10 minutes)
The default setting is “00:00” (midnight).
Example: When the default setting is in use,
automatic cleaning will start at 00:00 if the
projector is in projection mode. If the time
is set to 7:00, automatic cleaning will start
at that time if the projector is in projection
mode.
•
•
•
•
•
•
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
SUB MENU
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
ENTER
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
SUB MENU
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
ENTER
AIR FILTER CLEANING
TIME
EXECUTE
MENU SELECT
CHANGE
00:00
AIR FILTER CLEANING
TIME
EXECUTE
MENU SELECT
CHANGE
00:00