Filter
Top Products
ENGLISH – 55
Basic Operation
5. Press ▲▼ to select “COLOR”.
6. Press DEFAULT on the remote
control to restore the factory
default.
7. Follow the same procedure
(steps 5-6) to restore the factory
default for “TINT”, “COLOR
TEMP.” and “GAMMA”.
Note
sRGB is only enable when RGB signals are being
input.
•
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
ADJUST
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
ADJUST
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
* When DEFAULT is pressed, the projector
automatically returns to AUTO1 or AUTO.
RGB1/RGB2/DVI-D terminal input
signals
Note
Refer to the types of RGB/YPBPR/DVI-D signals
compatible with the projector. (p. 118)
To display pictures complying
with the sRGB standard
sRGB is the international color reproduction standard
(IEC61966-2-1) established by IEC (International
Electrotechnical Commission).
To reproduce colors more faithfully in compliance
with the sRGB standard, perform the following setting
procedure.
1. Set “COLOR MATCHING”
adjustment to “OFF”. (
p. 67)
2.
Display the “PICTURE” screen.
(
p. 49)
3. Press ▲▼ to select “PICTURE
MODE”.
4. Press ◄► to select “NATURAL”.
■
•
RGB YPBPRRGB YPBPR
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
REGISTER
ENTER
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
REGISTER
ENTER